answersLogoWhite

0

The ceiling grid is not going to help all that much. not on that long a wall. How far above the ceiling is the roof and is there something there that a brace could be attached to? A V brace every so often or do the wall in sections with a longer stud between each section that extended to the roof structure.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

What does a suspended ceiling look like?

A suspended ceiling, also known as a drop ceiling, looks like large tiles. These tiles are placed on top of a metal track that connects them. This is a popular ceiling type because it is quick and easy to install.


What does the 'MF' in 'MF Suspended Ceilings' stand for?

the mf in mf ceiling stands for ,metal furring


How do you put drywall in the basement?

It would depend on the type of ceiling that is being installed. Ask a more specific question, like "How do you install a suspended ceiling?", or "How do you install a drywall ceiling in a basement?"...something along those lines.


How do get dried paint off ceiling and metal?

What kind of dried paint? What is under the paint on the ceiling? ....on the metal?


What is a ceiling partition?

A ceiling partition is a track on the ceiling that may have a metal or wooden wall fitting into it. This divides a room by the ceiling support.


How to Install Modern Ceiling Panels?

One of the main elements in modern architecture and construction is the ceiling panel. Ceiling panels are usually part of a dropped ceiling or secondary ceiling that is hung below the structural ceiling. A dropped ceiling is often called a false or suspended ceiling. The area between the ceiling panels and the structured ceiling is normally used for heating and air-conditioning duct work and to conceal wiring and pipes. The suspended ceiling was originally designed to hide the underside of a floor as well as to provide acoustical balance in a room.Metal channels in the ceiling grid work are shaped like an upside down “T” and these channels hold ceiling panels in place. The grid work is suspended with wires that are attached to the main ceiling. The metal channels snap together in a regular pattern of 4x4 or 2x2 foot grids. Ceiling panels come in different colors, materials, and sizes. Mineral fibers as well as wood, plastic, and metal ceiling panels are used for commercial as well as residential construction. Light fixtures, HVAC air grills, sprinklers, speakers, and other ceiling fixtures can be placed in the ceiling panels. Some panels are made to conform to other fixtures so installation is faster and more cost effective.Ceiling panels can transform the look of any room thanks to the modern materials and the colors available for do-it-yourself projects. For a minimum investment the ceiling in a basement or any room can converted to useable living space when ceiling panels are incorporated in the remodeling plans. Ceiling panels offer easy access to any wiring or plumbing issues which reduces maintenance costs. Suspended ceiling panels can be replaced from time to time using the same grid work.The major disadvantage in installing modern ceiling panels is the reduction of head space, but most renovation projects take that fact into consideration and adjust the grid height so the ceiling is seven or eight feet above the floor. Most of the modern ceiling panels come with new grid shapes and edge molding that create a seamless pattern so the height of the ceiling is not as much of an issue as it was twenty years ago.


How is a crate suspended from a rope that is connected to a metal ring?

The crate is suspended from a rope that is connected to a metal ring by the force of gravity acting on the crate and the tension in the rope.


What is metal in water?

If you are referring to any metal particles suspended in water I believe the term you are looking for is Colloidal. For example.... Colloidal Silver is silver particles suspended in water.


Where should the green ground wire attach in a ceiling fan install going direct to a 110 outlet?

The green ground wire should be attached directly to the junction box. That is the metal housing where the house wires enter the outlet.


How much does metal ceiling grid weigh?

The weight of a metal ceiling grid can vary depending on the specific dimensions and material used, but on average, it weighs approximately 0.5-1.5 pounds per square foot. It is recommended to refer to the manufacturer's specifications for precise information on the weight of a particular metal ceiling grid.


Is it okay to use metal lampshades for ceiling lights?

it is generally safe to use metal lampshades for ceiling lights as long as they are properly wired and installed according to the manufacturer's instructions and recommended usage.


How do you attach a metal comb to a veil using Velcro the veil has velcro on it and was once attached to a headband but now needs to attach to a metal comb?

To attach a metal comb to a veil using Velcro you would need the Velcro on the band of the headpiece and then use a good glue from a craft shop such as 'Michael's Crafts' and use one-sided Velcro (one side smooth) and use the glue on that side to attach to the metal. Be sure to read the label of the glue to be sure it will stick to metal.