0
What else can I help you with?
What does the word joist mean?
Joist = one of the parallel pieces of timber to which the boards of a ceiling or floor are fastened
What is a timber joist?
A joist, either floor or ceiling are the boards that go across the building and tie the walls together. A timber joist would be a rough sawn beam. Basically a tree that has been squared up.
How is timber different from other wood?
Timber is just another name for wood, In practice wood in its rough form is usually refered to as timber, tree trunks unprocessed are probably timber in it's purest form. In a house unfinished wood ( generally found in the roof and beneath the floor) is referred to as timber e.g. roof timbers or floor timbers/joists. Timber which has been planed (smoothed) and finished off e.g. skirting boards and window sills are referred to as 'joinery' grade or finished, they are still however timber and the difference is a discriptive reference rather than a physical difference.
What occurs in the sub-floor?
The floor of a house that is off the ground is first built with a layer of boards that is at a 45 degree angle to the load centers. To the average person, this layer of boards looks like a floor. However, they are wider than the boards than are normally used to go on the floor. The floor that people walk on will be put on top of these boards. The boards used for the floor will be thinner.
How can I replace hardwood floor boards?
To replace hardwood floor boards, follow these steps: 1. Remove damaged boards by cutting and prying them out. 2. Measure and cut new boards to fit. 3. Install new boards by nailing or gluing them in place. 4. Sand and finish the new boards to match the existing floor.
What size boards should I use for the deck floor?
For a deck floor, it is recommended to use 2x6 or 5/4x6 boards for a sturdy and durable surface.
What is flooring?
The boards or other material of which a floor is made.
What are the best practices for replacing hardwood floor boards?
When replacing hardwood floor boards, it is important to carefully remove the damaged boards, match the new boards to the existing ones in terms of species and color, acclimate the new boards to the room's humidity levels, and properly secure them in place using nails or adhesive. Sanding and refinishing the entire floor after replacement can help ensure a seamless look.
What is softwood made up of?
Do you mean what can soft wood be used for. Here are some uses. Roof trusses/ floor joist/ ceiling joist/ stud partitions/ timber flooring/ wall strapping/ linning boards internal finnishing. ect
How do you raise the floor on a concrete slab?
answerYou would lay timber floor joists acroos the the size would depend upon how high you need to raise the floor. Then you'd lay floor boards over the joists. the joists would be layed every 400mm and would require noggings to reduce movevement and 'creaking'. The floor boards should be of a tongue and groove type for the same reasons. The cheapest floor bords are made of chipboard and are 8' by 2' and they should be glued.If you wanted to raise it a matter of a few inches then you could just screed over the top of it. If you wanted just a few mm then a self leveling liquid can be applied.
Do steam cleaners lift varnish on polished floor boards or shrink them?
Steam cleaners do not lift varnish or shrink polished floor boards. The whole idea of applying varnish to a floor is so that the floor will be protected from moisture or liquid being absorbed by the wood.
What are the best practices for installing and maintaining floor timber in a residential setting?
The best practices for installing and maintaining floor timber in a residential setting include proper subfloor preparation, acclimating the timber to the environment, using the correct installation method, sealing or finishing the timber to protect it, and regular cleaning and maintenance to prevent damage and wear.
