0
Yes. I use a turkey fryer pot 3/4 full of water and 500 ml glycerine. Bring to a boil then back off heat to maintain steam. I direct steam through a homemade steam box made of 2" PVC pipe. Steam for 2 hours per 1" thickness of wood. This method works well for kiln dried wood. You need NOT use glycerine if wood is green when bending but steam for same amount of time.
What else can I help you with?
Can glycerin be used as a replacement for mineral oil as a lubbrcant for rottenstone in wood refinishing?
No, glycerin is not a suitable substitute for mineral oil as a lubricant for rottenstone in wood refinishing. Mineral oil is specifically formulated for this purpose due to its properties, such as its ability to provide lubrication and enhance the polishing process. Glycerin may not offer the same lubricating qualities needed for wood refinishing with rottenstone.
Using glycerin on floors?
Glycerin can be used to add shine to floors, especially hardwood floors. Mix glycerin with warm water and vinegar in a spray bottle, then mist the solution onto the floor and wipe clean for a shiny finish. Glycerin can also help condition and protect wood floors from drying out and cracking.
Can you straighten bowed wood effectively?
Yes, bowed wood can be effectively straightened using methods such as steam bending, heat bending, or using clamps and weights to gradually reshape the wood.
Do you have glycerin which can be applied on the dry skin?
any glycerin can be used for dry skin
What is bending timber?
If a plank or strip of wood is placed in a steam box, it will become softer due to the very hot steam. The softened wood can be bent (with care) until it takes on a bend, which it keeps on cooling. This bending technique is used to form curved furniture.
What is the best type of wood for steam bending?
The best type of wood for steam bending is typically hardwoods like oak, ash, or hickory. These woods have strong and flexible fibers that can withstand the bending process without breaking.
What is the best type of wood for bending in woodworking projects?
The best type of wood for bending in woodworking projects is typically hardwoods like oak, ash, or walnut. These woods have strong and flexible fibers that make them ideal for bending without breaking.
Is glycerol the same as glycerin?
Yes, glycerol and glycerin are the same compound, often used interchangeably.
How do people make curves in wood?
From easiest to hardest: With a saber saw. With a band saw. With a coping saw. With steaming and then bending a thin piece of wood. With cutting close kerfs in wood, and them bending it mechanically. With careful hand carving.
What has the author William Cornwall Stevens written?
William Cornwall Stevens has written: 'Solid and laminated wood bending' 'Kiln opeartor's handbook' -- subject(s): Drying, Kilns, Lumber 'temperature versus relative humidity Kiln operator's handbook' 'Wood bending handbook' -- subject(s): Wood bending
Can glycerin be used fore canning chairs?
No, glycerin is not typically used for canning chairs. Canning refers to preserving foods in jars, while glycerin is a substance often used in cosmetic and pharmaceutical products. It is not suitable for preserving or treating chairs.
Is bending wood reversible?
It depends on how you bend the wood. For example, if you steam it, it is reversible. But if you cut notches, it is not reversible.
