0
What else can I help you with?
How can I determine if the chimney flue is open?
To determine if the chimney flue is open, shine a flashlight up the chimney and look for light coming through the flue. If you see light, the flue is open. If not, it may be closed.
How do you know which way is open and closed for a chimney flue?
if you are talking a stove flue [free standing] the handle on the flue will indicate open or closed. if handle is horizontal flue is closed. if vertical flue is open. if you mean fireplace flue usually pushing flue handle to rear or back of fireplace will open it and pulling it toward you will close it. you can check by moving handle slowly while looking with flashlight up in the chimney. be careful as soot can come down and out if you get too aggresive.
When is a Fireplace flue open?
When the fire is burning, until the ashes are cold. The damper should be open at these times.
What are the uses of sulphur trioxide?
In process plant environment, SO3 gas is mixed into flue gas from combustion to make the ashes charged up before flowing through electrostatic precipitators. The electrostatic precipitators will then trap the ashes, making cleaner process emission possible.
How do you use the word flue in a sentence?
"The flue on the chimney was closed, causing smoke to move out into the room." "Damaging fires can occur when unburned material called creosote accumulates on the metal flue and in the upper chimney."
How cool should a firebed be to allow closing the flue?
By flue, I believe you mean the damper in the chimney, which has the effect of closing off the flue. Close the damper any time you are not using the fireplace. Remember -heat rises -so heated air will also rise up and out the flue in the winter. In the summer it is also good to keep the flue closed because heat and humidity will activate the smelly properties of the ash and creosote in the firepalce chimney and create a bad odor in the home. In order for a damper to do its job it must seal tightly/ If your existing mechanical damper is broken, missing or in a bad state you can repair it or replace it with a chimney top damper or a chimney balloon. But, open the damper before lighting a a fire, or it will rapidly get quite smokey in the house.
How do you properly close a fireplace flue?
To properly close a fireplace flue, you should make sure the damper is fully closed and secure. This helps prevent heat loss and drafts when the fireplace is not in use.
What does a flue gas desulphurisation plant do?
A flue gas Desulphurisation (FGD) plant removes Sulphur Dioxide from the flue gas before it is released into the atmosphere and hence reduces our impact on the environment.
How do you make a sentence making the word flue?
At the beginning of fall, before you build a fire in your fireplace make sure to open the chimney's flue.
If you have a handle to adjust the flue on a wood burning stove what is the slide handle on the bottom for?
This handle would be for emptying ashes that fall below the grate i would think.
Do you close the flue after lighting a gas fireplace?
NO. a flue should never be closed when a fire is lit. It is the way poisonous gases like carbon monoxide are taken out of a room,hallway or any enclosed space. flues can be closed only when a fire is not being used,to keep out draughts on windy days.
How do you know if the flue is open?
if it is instaled corectly, the handle which controlls the flue goes in the same direction as the plate inside the chimney. so if the handle is horizontal, the flue is closed. if the handle is verticle, the flue is open. you shouldn't have to close the flue all the way, at most it should be at a 60degree angle to allow smoke to leave, while retaining heat. open the flue all the way when you open the door to the stove so that the smoke will go out the chimney and not into your face and house. but close the flue back down some to keep in the heat and not waste firewood warmth on the air outside.
