There is a grinding wheel (right angle grinder) made for just for smoothing concrete. You can buy these at concrete supply stors or I have also seen them at the building stores.
To make concrete smooth, you can use a concrete float or trowel to level the surface while it is still wet. You can also use a concrete grinder or polisher to smooth out any rough spots after the concrete has dried.
To make smooth concrete, you can use a concrete mix with the right proportions of cement, sand, and aggregate. Ensure proper mixing and pouring techniques, and use a trowel to smooth the surface before it sets. Consider using a concrete sealer or polish for a smoother finish.
To achieve a smooth and shiny finish when working with concrete, you can follow these steps: Start by properly preparing the concrete surface by cleaning it and removing any debris. Use a high-quality concrete mix with a fine aggregate to reduce the chances of surface imperfections. After pouring the concrete, level and smooth the surface with a trowel. Allow the concrete to partially set before using a steel trowel to further smooth the surface. Once the concrete is fully set, use a concrete sealer or polish to achieve a shiny finish.
you need to have a ''keyway''---that is a groove in the base concrete,can be cut in if concrete has set,if not set,oil a 2x4lightly(lightly) & imbed it into the base concrete flush.
To achieve a smooth concrete finish for your project, make sure to properly prepare the surface by cleaning and leveling it. Use a high-quality concrete mix and follow the instructions carefully when mixing and pouring the concrete. After pouring, use a trowel to smooth out the surface, and consider using a concrete sealer to enhance the finish and protect it from damage.
The most important tool needed when making concrete is a concrete mixer. Once the concrete is mixed and lain it is also important to have equipment to smooth out the surface.
To achieve a smooth finish when working with concrete, make sure to properly mix the concrete to the right consistency, use a screed to level the surface, and finish with a trowel to smooth out any imperfections. It is also important to work quickly and efficiently to prevent the concrete from drying too quickly, which can lead to a rough finish.
To smooth concrete for a polished finish, you can use a concrete grinder with diamond pads to grind down the surface until it is smooth. Then, apply a concrete sealer to protect and enhance the polished look.
Concrete has a lot of creases and bumps and the wooden ramp is smooth
To achieve a smooth finish on your concrete project, make sure to properly prepare the surface by cleaning and leveling it. Use a high-quality concrete mix and follow the manufacturer's instructions for mixing and pouring. After pouring the concrete, use a trowel to smooth and level the surface, working in small sections. Finish by using a concrete float to further smooth the surface and remove any imperfections. Allow the concrete to cure properly before applying any sealant or finish.
Fill the can with concrete and let it set.
You use thin set cement, a bit like very smooth concrete.