I would think the heating grid would have to be under the sub floor. It is was in direct contact with the laminate, even with the foam insulator, the floor moves just a little bit and over time could wear through the heating element.
No. You have to glue your linoleum on the hard surface, but Laminate is a floating floor and always move.
No, laminate is floating type of floor installed over an insulation pad. Hardwood floor has to be nailed, stapled or glued to the subfloor. If you do manage to install hardwood on top of laminate sooner or later your Laminate floor will expand due to high temperature or humidity and it will create gaps between hardwood planks.
No, laminate is floating type of floor installed over an insulation pad. Hardwood floor has to be nailed, stapled or glued to the subfloor. If you do manage to install hardwood on top of laminate sooner or later your Laminate floor will expand due to high temperature or humidity and it will create gaps between hardwood planks.
Remove the laminate floor first
I would definitely recommend against this. While laminate can be installed on top of tile, it requires that the floor is level and even. So, if your slate is rough and uneven, it is not a good subfloor to install any hard surface. If you install the laminate directly on top of an uneven floor like this, it will most likely crack and move a lot when you are walking on it. However, an alternative (albeit an expensive one), is to add self leveling cement on top of the slate and level out the floor, and then you could install the laminate on top. This might be less expensive and less difficult vs. trying to remove the slate, but it is not a cheap option.
If the vinyl is down tight , the answer is YES, Laminate con go over it
You should NEVER install tile over laminate. Pull up the laminate (which is very easy) and install the appropriate subfloor, then install tile on that
It depends on the condition, material and surface of the laminate. A linolium floor, for example, is soft composition with a textured surface. This makes a horrible foundation for ceramic tile, giving room to crack the grout between tiles. A hardwood-type laminate is smoother and harder which is a better foundation. That said, the best thing to do is rip the laminate out and start fresh.
Yes, you can install a laminate floor system over existing hardwood floors. Just be sure that the existing hardwood is pretty smooth or the hump in the floor will transfer through. You must use a vapor barrier over your existing hardwood to reduce sound as well as moister transfere between two floor systems. Be sure to let your new floor acclimate to your room temp. for at least 48 hrs. this is especially important if you are installing floor in the winter.
In my opinion, no it will swell.In my opinion, yes you can install laminate over tile if the tile is in good condition/stable and even. You would first put underlayment above the tile and then the laminate on top. (you always add underlayment before laminate). It is important, though, to make sure you have enough clearance for the doors (you may need to shave the doors). If it's a kitchen, you also want to make sure there is enough clearance for the appliances.
Yes. You should use a good quality underlay with it though to reduce the noise of the laminate knocking on the tiles.
No, you should not lay laminate flooring over carpet padding. Laminate flooring requires a solid, stable surface for proper installation and support. Carpet padding can compress and shift, leading to an uneven floor and potential damage to the laminate. It's best to remove the carpet and padding to ensure a suitable base for the laminate.