No, it will wear unevenly. If the floor is solid (ie not warped floorboards) and the uneven bits slight, you can spread leveling compound (a sort of wet cement slurry) over the uneven floor to obtain a flat surface.
Self-leveling concrete offers several benefits for basement floor renovations. It provides a smooth and level surface, making it easier to install flooring materials such as tiles or carpet. It also helps to correct uneven surfaces and can improve the overall appearance of the basement. Additionally, self-leveling concrete is durable and can help to prevent moisture issues, making it a popular choice for basement renovations.
Generally, no. The carpet pad will have too much bounce causing the engineered hardwood (or even laminate) to break and split. That being said there are some thin felt carpet pads that could work, but I wouldn't recommend it. I'm not sure why you are asking this question. If it's because you had carpet there and you are hoping to reuse your existing carpet pad, that is a big no no. The carpet pad will be uneven which can cause problems and worse than that, it will already be dirty with germs and potentially moisture and you could develop mold and/or odor issues. Also, if your engineered hardwood is over concrete, you want the traditional laminate/hardwood underlayment which also has a moisture barrier. This, of course, is assuming that you are doing a floating floor. If you are nailing or glueing than it's an even firmer no.
The best flooring option for uneven concrete surfaces is self-leveling concrete or a floating floor system, such as laminate or engineered hardwood. These options can help create a smooth and level surface over the uneven concrete.
Either a clear finish or primer and paint should be applied to all sides to prevent uneven moisture absorption, especially in a basement setting.
bad design. there is a wiring harness running below carpet !
Uneven basement floors are commonly caused by poor soil compaction, water damage, or foundation settlement. To effectively repair them, the underlying cause must be addressed first. Solutions may include installing support beams, leveling the floor with concrete, or waterproofing the basement to prevent further damage. Consulting a professional contractor is recommended for proper assessment and repair.
I would definitely recommend against this. While laminate can be installed on top of tile, it requires that the floor is level and even. So, if your slate is rough and uneven, it is not a good subfloor to install any hard surface. If you install the laminate directly on top of an uneven floor like this, it will most likely crack and move a lot when you are walking on it. However, an alternative (albeit an expensive one), is to add self leveling cement on top of the slate and level out the floor, and then you could install the laminate on top. This might be less expensive and less difficult vs. trying to remove the slate, but it is not a cheap option.
Common causes of an uneven basement floor include settling of the foundation, water damage, or poor construction. To effectively level and repair an uneven basement floor, the following steps can be taken: 1. Identify the underlying cause of the unevenness. 2. Address any structural issues, such as fixing foundation problems or repairing water damage. 3. Use self-leveling concrete or floor leveling compound to even out the surface. 4. Consider hiring a professional contractor for more complex repairs.
I think that luxury vinyl tile or plank is a great option for a kitchen. First, it is waterproof (laminate is not and with water it can be permanently damaged. Second, luxury vinyl is usually glued down to the floor, so it is more secure and feels/sounds more real vs. a laminate floor which is floating and sounds tinny/hollow underneath. Third, if you floor is uneven/not level, the luxury vinyl will work better as it is a flexible material and can tolerate indiscrepancies; a laminate floor will move a lot of if the floor is uneven (and could even buckle and break if it's too uneven. Please note that you will still need to make sure you floor is smoothed out before putting luxury vinyl on top, as the the vinyl will telegraph the shape of what is underneath it.
The most common signs that indicate a need for basement foundation repair include cracks in the walls or floors, uneven or sloping floors, doors and windows that stick or don't close properly, and water leakage or flooding in the basement.
Installing a floating floor in a basement can provide benefits such as improved moisture resistance, easier installation over uneven surfaces, better insulation, and the ability to easily replace damaged sections.
To ensure proper leveling of the floor for laminate installation, you should first clean and prepare the subfloor. Next, use a leveling compound to fill in any low spots and smooth out any uneven areas. Finally, use a long straight edge or level to check for any remaining dips or bumps before laying down the laminate flooring.