0
What else can I help you with?
Can you use a 42 inch mtd mower deck to replace a 38 inch mower deck on a yardman mower?
As long as they are close to the same year and model, yes. I have two decks side by side, one 38" and one 42", and all the brackets are the same. The belt will need to be changed for a longer one, though.
42 inch Murray mower engage deck won't cut grass?
The belt is too loose. Replace it or adjust the idler.
What mower decks will fit a john deere 320?
The John Deere 320 is compatible with several mower decks, including the 48-inch and 54-inch decks designed for the 300 series. Specifically, the 48-inch Mower Deck (Model 48) and the 54-inch Mower Deck (Model 54) are direct fits for the 320. Additionally, the 60-inch Mower Deck (Model 60) can also be used, but it may require additional components for proper installation. Always consult the owner's manual or a local dealer for specific compatibility and installation guidance.
Where can you see a drawing of how a deck belt goes on a model 3410 with 42 inch deck?
You will need to order a manual on the mower from the manufacturer (I assume Simplicity).
What size blade belt for a 40 inch deck 12.5 engine Murray rideing mower?
84 inch
How do you replace a drive belt on a forty two inch TORO mower?
You will need to remove the cutting deck to get to the blades. Here you will find the drive belt, which you just slip off.
What size of belt fits a ranch king mower that has a 38 inch deck?
5L74 gates
What is 30' mower deck belt size for john deere srx75?
4L 63 inch
How do you put on belt on Husqvarna yth 180 deck 46 in cut?
To put on the belt on a Husqvarna YTH 180 with a 46-inch deck, first, ensure the mower is turned off and the key is removed. Raise the deck to its highest position and remove the deck from the mower by detaching the pins or brackets. Then, remove the old belt from the pulleys and replace it with the new belt, ensuring it follows the correct routing as indicated in the owner's manual. Finally, reattach the deck to the mower and lower it back to the desired cutting height.
How do you replace deck belt driver mtd yardman 38 cut?
To replace the deck belt on an MTD Yardman 38-inch cut mower, first, disconnect the spark plug for safety. Then, remove the deck by unfastening the retaining bolts and lifting it off. Next, take off the old belt by removing any necessary covers and pulleys, then thread the new belt through the appropriate path around the pulleys. Finally, reassemble the deck and reconnect the spark plug before testing the mower.
How belt fits on mower deck 60in 455 johndeer?
To fit the belt on a 60-inch John Deere 455 mower deck, first, ensure the mower is turned off and parked on a flat surface. Remove the mower deck from the tractor, then locate the belt path according to the owner's manual. Loop the new belt around the pulleys, making sure it follows the correct routing, and ensure it is properly seated in the grooves. Finally, reattach the mower deck and check the tension before testing the mower.
How many blades does a 38 inch deck for a Murray riding mower have?
most likely 2, look underneath
