answersLogoWhite

0

Looking at the arbor/nut side, counter clockwise.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

Does the manufacturing logo on a circular saw blade always face out toward you?

Depends on the manufacturer and if the saw is left or right handed. Normally a saw cuts UP rotating in the opposite direction a wheel would. Click the saw on, without a blade in to see which way the motor turns then put the blade in to cut in that direction.


How do you change a DeWalt circular saw blade?

To change a DeWalt circular saw blade, first unplug the saw for safety. Then, loosen the blade nut with a wrench and remove the old blade. Place the new blade onto the saw, making sure the teeth face in the right direction. Tighten the blade nut securely and plug the saw back in.


How do I change the blade on a Dewalt circular saw?

To change the blade on a Dewalt circular saw, first unplug the saw for safety. Then, use the provided wrench to loosen the arbor nut and remove the old blade. Place the new blade onto the arbor, making sure the teeth are facing the right direction. Tighten the arbor nut securely and plug the saw back in.


Can I use a larger blade on my circular saw?

No, it is not recommended to use a larger blade on your circular saw as it may not be compatible with the saw's design and could pose a safety risk. Stick to the recommended blade size for your saw.


How do I change the blade on my Ryobi 18v cordless circular chain saw?

How do I change the blade on my 18v Ryobi cordless circular chain saw?


How can you sharpen a circular saw blade with a file?

To sharpen a circular saw blade with a file, you need to securely clamp the blade in place and use a flat file to carefully sharpen each tooth at the same angle. Make sure to file in one direction only and maintain a consistent angle for best results.


How do you change the blade on a Dewalt circular saw?

To change the blade on a Dewalt circular saw, follow these steps: Unplug the saw or remove the battery. Press the spindle lock button to lock the blade in place. Use a wrench to loosen the arbor nut and remove the old blade. Place the new blade onto the arbor, making sure the teeth face in the right direction. Tighten the arbor nut securely. Release the spindle lock button. Plug in the saw or reinsert the battery and test the new blade.


What is the best way to change the blade on a DeWalt circular saw?

To change the blade on a DeWalt circular saw, follow these steps: Unplug the saw and remove the battery if it's cordless. Locate the blade lock button and press it to lock the blade in place. Use a wrench to loosen the arbor nut and remove the old blade. Place the new blade onto the arbor, making sure the teeth face in the right direction. Tighten the arbor nut securely. Release the blade lock button and plug the saw back in or reinsert the battery. Test the saw to ensure the blade is securely in place before using it.


What is a buzzsaw?

A buzzsaw is another name for a circular saw - a power saw with a circular cutting blade, whose teeth rotate rapidly.


What type of saw blade would you use in a circular saw for cutting a quarter inch backer board?

a concrete or masonry blade


How does a Reciprocating Saw differ from a Circular Saw?

A reciprocating saw's blade moves in a back and forward motion. (thus, the Jigsaw ans sabre saw are types of reciprocating saw, but not called such). A circular saw such as the type made famous by Skil has a round blade and revolves to cut.


The size of a portable circular saw is determined by?

The size is usually referenced by the largest diameter circular blade which would fit in the saw.