0
What else can I help you with?
Can you use fibermesh in concrete in lieu of rebar for a driveway?
You still need to use both, fiber mesh only helps with the small surface cracks.
How can you stand a lighted Christmas arch up on a driveway?
If you are using PVC, hammer half inch rebar into the ground on either side of the driveway. A 4 foot piece hammered 2 feet into the ground will do a great job.
How much rebar do you need for 2 cubic yards of cement?
The amount of rebar depends on the thickness of what you are making. All three dimensions.
Do you need to use wire mesh or rebar if im having fibermesh mixed with my concrete?
You still need rebar, unless you are filling a drop in an existing slab that already has steel in it.
Do you need rebar for a 4-inch slab?
Yes, it is recommended to use rebar for a 4-inch slab to provide additional strength and prevent cracking.
Asphalt Driveway Cost?
form_title= Asphalt Driveway Cost form_header= Redo your driveway with asphalt. What is the size of the driveway?*= _ [50] Do you need to remove old paving?*= () Yes () No How old is the driveway?*= _ [50]
What is the weith 168x27-7 rebar?
You need the size of the rebar involved to calculate the weight. Charts can be found at CRSI.org or Rebarapps.com. Than take that and multiply it by the the length of the rebar. For example, a #4 rebar weighs 0.668 lbs/ft. If you have 5 @ 20-00 pieces that is 0.668 X 20 X 5 = 67 lbs. You need to know the size of the bar to calculate.
What is rebaring?
Rebar Detailing is a procedure of making shop drawings for the steel reinforcement for the development procedure. The Rebar Detailing procedure incorporates the position, bending shapes, amount, description, laps of the reinforcing steel and measurements. The Rebar Detailing Drawings are made to incorporate the separating, area, rebar size and lap of steel. The Rebar Detailing Services includes: Rebar Detailing Services, Rebar Shop Drawings Services, Rebar fabrication Services, Rebar Framing Plan Design, Rebar Structure Foundation, Rebar Pit Design, Rebar Framing Plan, Rebar Beam Design, Rebar Structure Steel Detailing, Structure Foundation Rebar Detailing.
Driveway Paving?
form_title= Driveway Paving form_header= Keep your drive smooth. What is the size of your driveway?*= _ [50] Do you want a concrete driveway?*= () Yes () No When do you need the project completed?*= _ [50]
Who maintains shared driveway easment?
You need to review the document that created the shared driveway. Shared driveway agreements generally provide for maintenance and upkeep.
How many systems do I need to have installed?
The number of driveway alarm systems you need would depend on the range that your system can reach and the size of your driveway. There are systems available for basic driveways and up to a 4-mile driveway. Here is a great place to buy a driveway alarm system: http://www.gadgetshack.com/wireless-driveway-alarm.html
How much rebar for 20 x 60 x 8 inch slab?
To determine the amount of rebar needed for a 20 x 60 x 8 inch slab, you first need to calculate the perimeter and then the spacing of the rebar. For a typical slab, rebar is usually placed at 12 to 18 inches apart in each direction. Assuming you use #4 rebar (0.5 inches in diameter) spaced at 16 inches on center, you would need approximately 8 pieces of rebar along the 20-inch side and 5 pieces along the 60-inch side, totaling around 13 lengths of rebar, considering overlaps and cut-offs. Always consult local building codes and structural engineers to confirm specific rebar requirements for your project.
