Some athletic (sweat) pants and pajama pants are basically two pieces -- the right and the left, that are sewn together.
If that is the type of pattern you have, fold the paper pattern in half and make a crease from waistline to the hem on the paper pattern. Unfold the pattern and cut down the crease or fold line, from the waistband to the hem of pants on the pattern.
Now pin the CUT pattern on the fabric you wish to sew, but space the two pieces out so there is room between them. If you want the waistline 4 inches wider, for example, you will want the two paper pieces to be at least 2 inches apart (plus extra for any seams.) The additional fabric you gain is muliplied by TWO as you are cutting two pants pieces: a right and a left. You can add a piece of additional paper and tape into place, but there is no reason you have to. Simply place the paper pieces on a two-ply of fabric, use a ruler to be sure the two pieces are spaced equally apart the whole way down, pin the pattern pieces into place, and then cut the fabric. The notches, grain of fabric, etc. all stay the same. The only thing you are changing is the width of the pants.
You will need to add a length the the elastic waistband as well. If the waistband is a separate piece, it needs to be cut longer -- the same additional length as you added to the pants pattern.
Width does mean side to side.
To calculate the square footage for waterproofing a chimney, first measure the height and width of each side of the chimney. Multiply the height by the width for each side to get the area, and then sum the areas of all sides. If the chimney has a cap or crown, include that in your calculations by measuring its length and width as well. Finally, add a little extra to account for overlaps and seams in the waterproofing material.
length is up and down width is side to side
height is up & down, width is side to side
An American football typically has 4 seams – one on each side where the two pieces of leather that make up the football are stitched together.
No. Perimeter = side + side + side + side. (However many sides there are.) Area = length x width
You have sideways <<< Upways ^^^^ And of course width which is how wide it is. Side and width are the same thing ;). Height is the thing you x the width and the side by.
Width.
The width and length of a rectangle are two of its main dimensions. The width is the measurement of the shorter side of the rectangle, while the length is the measurement of the longer side. The area of a rectangle is calculated by multiplying the width by the length.
tie up your pants on the side
The girls all wrote something important they did in the pants on the side of them.
No. A square on its side will have a width equal to its side length. On its vertex, its width will be larger: up to sqrt(2) times as large.