You must use 5/*" sheetrock
Local codes can vary - check with your building Dept
You use 5/8 fire proof drywall on both sides.
A fire rated wall is rated as such because of the material used in construction. There is specific drywall board and rated doors to obtain a fire rating. The standards are 2 and 4 hour ratings unless referring to electrical equipment.
1 hour fire-rated ceiling for basement is basically, 2 5/8's drywall doubled up. Also anything protruding or flow-throughs need to be caulked with fire rated caulking. Make sure that when you hang the first sheet of drywall that you take, mud and then put the other piece up. That is what makes it 1 hour.
The standard thickness of ceiling drywall is typically 1/2 inch. The thickness of the drywall can affect the overall structure of a room by providing support and stability to the ceiling. Thicker drywall may offer better soundproofing and fire resistance, while thinner drywall may be more prone to sagging or damage.
It's drywall that has a fire resistant additive, and is also thicker.
To ensure maximum fire protection when applying fire-rated drywall mud, it is important to follow these best practices: Use the correct type of fire-rated drywall mud that meets building code requirements. Apply multiple layers of fire-rated drywall mud as recommended by the manufacturer. Make sure to properly mix and apply the drywall mud according to the manufacturer's instructions. Pay attention to the thickness and coverage of the drywall mud to ensure adequate fire protection. Allow sufficient drying time between layers to ensure proper adhesion and effectiveness. Inspect the finished application for any gaps, cracks, or imperfections that could compromise fire protection. By following these best practices, you can help maximize the fire protection provided by fire-rated drywall mud in a building.
Fire retardant drywall should used when you finish off an attached garage as well as using a steel door on "passage" areas.
Fire code drywall typically weighs around 2.3 to 2.8 pounds per square foot. This weight can vary depending on the specific type and thickness of the fire-rated drywall being used.
yes it seems to be...not sure how much but ive been a drywaller for 20-21 years.
Various standards of Fire Rated doors do exist but for fire rated floors or ceilings - contact your Local Council
The recommended code for installing drywall in a garage is to use fire-resistant Type X drywall on the walls and ceiling, with all seams taped and mudded for a smooth finish. Additionally, it is important to ensure proper insulation and ventilation to meet safety standards.
It is drywall that will be fire-resistant for 3 hours.