They are not convertible units as they measure different things.
BHP = Brake Horse Power, the strength of the engine CC = Cubic Centimeters, the volume of the combustion chambers
624cc
This is a question that cannot be answered. A volume of space does not equal energy production. You could instead ask "How many cc's are required to make 1 BHP?"
cc is used to know about the engine size.....where as bhp tells you how much power is delivered at shaft ....it doesn't mean that larger engine size will produce more bhp than smaller one....both are different.....cc - cubic centimetres . to measure the engine displacement .bhp - brake horse power . to measure the power of a vehiclet's just a way to compare engines.The number of cc's the related to an engine, is the size of the engine. The actual size of the combustion chambers where the fuel is burned. Normally, the higher the cc's, the more fuel burned, therefore the more power.bhp is the actual horsepower put out by the engine as built, before attached to the car, which will be lower, as a nominal amount of horsepower is needed to turn the driveshaft and drive gears.t's just a way to compare engines.
The relationship between brake horsepower (bhp) and engine displacement in cubic centimeters (cc) isn't direct, as bhp depends on factors like engine efficiency and design. However, a rough estimate suggests that approximately 15-20 cc is needed for each bhp in a typical gasoline engine. Therefore, for 5 bhp, you might expect an engine displacement of around 75 to 100 cc. This is just a general guideline, as actual values can vary significantly depending on the engine's specifications.
Early cars had a 1895 cc, 4 cylinder, 8 valve, 105 bhp engine. Later they had a 1796 cc, 4 cylinder, 16 valve, 114 bhp engine.
You can't convert cc/min to cc/lbs.
A convert cc has 350 horsepower
To convert brake horsepower (bhp) to metric units, you can use the following conversion factor: 1 bhp is equal to approximately 0.7457 kilowatts (kW). Multiply the bhp value by 0.7457 to get the equivalent power in kilowatts.
To convert kilowatts (kW) to brake horsepower (bhp), you can use the conversion factor where 1 kW is approximately equal to 1.341 bhp. Therefore, 260 kW is roughly equivalent to 348.67 bhp (260 kW × 1.341 bhp/kW).
1 Kilowatt = 1.341 horsepower
HP does not directly relate to cc