answersLogoWhite

0

More detailed information needed. The word flush used as a woodworking term means 'just touching'. You need to tell us where it is on the house . Do you mean an external weatherboard, or a skirting board, or an architrave or what. Do you mean the board is flush with a wall and you want to remove part of it, or, do you mean you want the board to finish up being flush with some part of a wall. More info. Please.

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

What are in wall speakers?

Speakers mounted flush to a wall.


Why is the tub spout not flush with the wall?

The tub spout may not be flush with the wall due to improper installation or a design flaw.


Who wins when a player goes all in and the final card on the board is a flush?

When a player goes all in and the final card on the board is a flush, the player with the highest-ranking flush wins the hand.


How can I ensure that my cabinet is installed flush with the wall?

To ensure your cabinet is installed flush with the wall, use a level to check for evenness, shim the cabinet if needed, and secure it tightly to the wall studs with screws.


What are the best practices for installing a wood board panel on a wall?

To install a wood board panel on a wall, follow these best practices: Ensure the wall is clean and smooth. Measure and cut the panels to fit the wall. Use a level to ensure panels are straight. Secure panels with nails or adhesive. Finish with trim for a polished look.


What is flush mounted electrical installation?

In this case, flush means even with. For example an electric box could be mounted on the outside of your wall and would be an eyesore. Flush mounting recesses the box inside the wall and provides a flush mount for the outlet cover plate.


What mineral's primary use is for wall board?

Gypsum is used for wall board.


How do you install cement board on walls?

To install cement board on walls, first measure and cut the board to fit the wall. Then, apply thin-set mortar to the wall and press the cement board into place. Secure the board with screws or nails, making sure to leave a small gap between each board for expansion. Finally, tape and mud the seams to create a smooth surface for tiling or finishing.


What is the best way to install a sheetrock access panel in a wall?

The best way to install a sheetrock access panel in a wall is to measure and cut a hole in the sheetrock, attach the access panel frame to the wall studs, and then secure the panel in place with screws. Make sure the panel is flush with the wall surface for a clean finish.


What are the steps for installing board and batten with plywood on a wall?

Measure and cut plywood to desired size for the boards. Attach plywood boards to the wall using a nail gun or screws. Measure and cut battens to fit between the boards. Attach battens over the seams of the plywood boards using a nail gun or screws. Fill any nail holes or gaps with wood filler. Sand the surface for a smooth finish. Prime and paint the board and batten wall as desired.


What is the best way to hang a board on a wall securely?

To securely hang a board on a wall, use heavy-duty wall anchors or screws that are appropriate for the weight of the board. Make sure to locate and drill into wall studs for added support. Use a level to ensure the board is straight before securing it in place.


Can you dip after wizdom teeth get cut out?

Yes jus flush well after