0
What else can I help you with?
What is the pressure between a 100 pound bag a potate resting on the floor over an area of a100in2 and the floor?
100 pounds over 100 sq inches = 1 pound per square inch pressure
What is difference between ordinary mirror and 100 percent reflective mirror?
I think a regular mirror is a mirror that does not reflect all the light from a source, and actually soaks some light in. 100% mirrors reflect 100% of the light (theoretically not possible)
What is the symbol of England UK currency?
The pound is represented with £, and pennies are represented with p. * One Pence - 1/100 of a Pound * Two Pence -2/100 of a Pound * Five Pence - 5/100 of a Pound * Ten Pence - 10/100 of a Pound * Twenty Pence - 20/100 of a Pound * Fifty Pence - 50/100 of a Pound (aka 1/2, or Half Pound) * One Pound - 100/100, 1 full Pound * Two Pounds- 200/100, 2 full Pounds
Pennies in a pound?
There are 100 pence in the pound.
How much pennies are in a pound?
There are 100 pennies in a dollar, and since a pound is equal to 100 dollars, there are 10,000 pennies in a pound.
How do you do floor 46 on 100 floors?
You have to change each block so the picture on the wall matches the mirror image of the picture on the ground. See related link below for screenshots.
What is there one hundred of in a pound?
If the "pound" is a British Pound (Pound sterling), there are 100 "new pence" in a pound.
How many pence are in a pound?
Since 1971, there are 100 pence to the British pound. Prior to 1971, there were 240 pence to the pound.
What fraction of a pound is 28p?
There are 100 p in a pound so 28p as a fraction of a pound = 28/100 = 7/25
Is there 1000 pennies in a pound?
Nope - there are only 100 pennies in a pound.
Which is heavier - a pound or 100 grams?
One pound is is about 4.5 times heavier than 100 grams.
Can a a piece of equipment weighing 8000 pound be put on a floor rated at 80 psf?
To determine if an 8,000-pound piece of equipment can be safely placed on a floor rated at 80 pounds per square foot (psf), you need to calculate the required area. The weight of the equipment divided by the floor rating gives you the minimum area needed: 8,000 lbs / 80 psf = 100 square feet. If the equipment is placed on an area that is at least 100 square feet, it can be safely supported by the floor. Otherwise, it could exceed the load capacity and compromise structural integrity.
