answersLogoWhite

0

Faster, or more powerful? Faster: adjust governor speed (increase spring tension). Engine WILL explode eventually if set beyond factory no-load speed. More power: deck head, bigger carb, racing alcohol fuel, etc. Gauranteed to destroy engine. Could be fun while it lasts, though... If you're on a go-kart, definitely try a torque converter. It can make a 5 horse do the work of an 8 easy, and playing with sprocket sizes a little can really make it jump!

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

How do I remove the generator from the engine in a Briggs and Stratton 6200 W portable generator?

they make electricity


Can you replace your 12.5 Briggs and stratton tractor engine with a 16hp Briggs and stratton?

Yes, most all of the Briggs single cylinder engines are exchangable. You just need to be concerned to make sure that you don't under power your mower. In your case that is not a problem.


What is the correct spark plug gap for a Briggs and Stratton 6.75HP Lawnmower?

The correct gap for the spark plug of a Briggs and Stratton 6.75 Lawnmower engine 0.030. Most new plugs come with that gap, but it is best to check to make sure.


Does Briggs and stratton make diesel engines?

Yes, they do.


Is there a warranty on a briggs generator.?

A Briggs & Stratton generator comes with a 2 year warranty. If you visit the Briggs & Stratton website it will guide you on how to make a warranty claim within that period.


What type of oil for 6.5 HP Briggs stratton lawnmower engine?

My 6.75hp Briggs calls for 30wt, so I would make a reasonable assumption that the 6.5hp calls for the same.


How do you adjust timing on your 17.5 Briggs and stratton lawnmower engine?

There is no way to adjust the timing on a 17.5 Briggs engine. The magnet is on the side of the flywheel and there is only one way the flywheel can line up. All you can do is make wure that the coil is gapped correctly.


Where is drain plug on Briggs and stratton model 204412-0163e1?

On the Briggs and Stratton model 204412-0163E1 engine, the drain plug is typically located at the bottom of the crankcase, on the side or rear of the engine. It is a bolt that can be removed to drain the oil. Make sure to have a suitable container ready to catch the oil when you remove the plug. Always refer to the specific engine manual for precise locations and instructions.


How do you remove governor on Briggs and Stratton 17hp engine?

To remove the governor on a Briggs and Stratton 17hp engine, first ensure the engine is off and cool. Disconnect the governor linkage from the throttle plate and remove any associated springs. Next, locate the governor gear, typically found at the crankshaft, and carefully remove it. Make sure to consult the engine's manual for specific instructions, as modifications may affect performance and safety.


Why are the lawnmowers from Briggs and Stratton regarded as high quality?

Lawnmowers from Briggs & Stratton are regarded as high quality for a number of reasons. Briggs & Stratton have high quality engines specially designed for lawnmowers. They are also specialists in this niche market, and they concentrate all their resources to make sure they create quality products.


What size spark plug fits a Briggs and stratton 6.5hp motor?

official site for Briggs and Stratton Spark Plugs is: http://www.briggsandstratton.com/maint_repair/routine_maintenance/choosing_spark_plugs/ The proper spark plug will depend on the type of 6.5 HP motor that you have. Briggs and Stratton made several different ones and the best way to get the proper plug will be to call an authorized Briggs and Stratton repair shop with the mower make and model numbers.


How do you adjust the carburetor on a lawnmower engine?

Go to your local autoparts store and by the rebuild kit according to your carburetor. Inside the box will be an exploded diagram of the carb which will make it relativly simple to rebuild First of all what kind of engine do you have. Briggs and Stratton or Tecumseh. If you have a Briggs & Stratton engine the factory setting on the little black screw is 1 turn out, Tecumseh engines 'usually' do not have adjustments. hope this helps