How do you make a homemade toy car?

Answer 1

step 1: come up with a design; with accurate measurements and how your circuit will look like step 2: get all materials needed step 3: follow design and build car step 4: test it out you will need to know how to work circuits, and you will need to connect the motor to the axel so that the wheels move, to do so you can either se gears or a elastic

Answer 2

First you need to have piece of cardboard with you to make the body, secondly, you need a to poke the sides properly and make the sticks even so that it won't move to the left or right, lastly, Cut out a half triangle shape with the top gone and stab the surface of the cardboard with aPaper clipbut not to far from the half triangle so that the rubber band won't break and then once done use the paper clip poke through the hole and make the paper clip look like a hook so it could hold the rubber band and finally you are ready to boost it to heaven. (Because it's light but if you want heavy get a thick cardboard)

Answer 3

One can make a toy car with a motor inside by gathering wood and shaping it into the look for the car, then sanding the wood to make for a smooth surface. Next, get skinny metal rods for the axle, drill a dent into the base of the wooden car where the axles will be placed. Then, glue the axles onto the wood. Next, place the small tires onto the axle, and place a stopper at each end so the tire stays on. Also one should place a small motor to the bottom or the back of the wooden car and connect the motor wires to the wheels in order for the wheels to spin. Finally, turn the switch and be sure the wires are hooked up correctly for the tires to spin.

Answer 4

This has already been done. I am not sure if it is currently in production: http://www.virtualtoychest.com/aircar/aircar.html Thanks and good luck.

Answer 5

toys by the bundle.co.UK click on Nerf subheading and scroll down boom! Nerf longshot baby!

Answer 6

Well homemade might be a little difficult but if you buy one for parts or repair you could find out what the problem is and fix it.

Answer 7

light and lots of scoops and large wheels

Answer 8

you get wood and stick it together