0
What else can I help you with?
How high from tub to spout and mixing valve handle should you do rough ins?
I usually fit spout 6-8 inches above tub.
How do I go about performing a tub faucet valve replacement?
To perform a tub faucet valve replacement, first turn off the water supply to the tub. Remove the handle and trim plate to access the valve. Use a wrench to unscrew and remove the old valve. Install the new valve by screwing it in place and reattaching the handle and trim plate. Turn the water supply back on and test the new valve for leaks.
How can I replace a tub diverter?
To replace a tub diverter, you will need to turn off the water supply to the tub, remove the diverter handle and trim plate, unscrew the diverter valve, and install the new diverter valve in its place. Finally, reassemble the handle and trim plate.
How can I repair a leaking tub water valve?
To repair a leaking tub water valve, you can start by turning off the water supply to the tub. Next, remove the handle and trim to access the valve. Check for any damaged parts such as washers or O-rings and replace them if necessary. Reassemble the valve and turn the water supply back on to test for leaks. If the problem persists, you may need to replace the entire valve.
Where is the mixing valve in the boiler?
Mixing valve usually for tempering domestic hot water.
How can I repair a tub spout diverter?
To repair a tub spout diverter, you can start by turning off the water supply to the tub. Next, remove the diverter handle and the spout to access the diverter valve. Inspect the valve for any damage or debris that may be causing the issue. Clean or replace the diverter valve as needed. Reassemble the spout and handle, and turn the water supply back on to test the repair.
How do you change a mixing valve in a faucet?
mixing valve in a faucet: ok I will assume you are refering to a shower valve, that is the only faucet w/a mixing valve: shut off the hot and cold water. cut out valve or unsweat it. clean and flux new valve, pipe and fittings(if used) sweat in new valve
How can I ensure a successful mixing valve installation in my plumbing system?
To ensure a successful mixing valve installation in your plumbing system, follow these steps: Choose the right type and size of mixing valve for your needs. Install the mixing valve in the correct location in the plumbing system. Follow the manufacturer's instructions carefully during installation. Test the mixing valve for proper function before completing the installation. Regularly maintain and inspect the mixing valve to ensure continued performance.
How can I remove a tub from my bathroom?
To remove a tub from your bathroom, you will need to disconnect the plumbing, remove any surrounding tiles or fixtures, and then carefully lift and maneuver the tub out of the space. It is recommended to seek professional help if you are unsure of how to safely remove the tub.
How do you remove an old tub from the drain?
Once the old tub gets into the drain it is impossible to remove.........
How can I fix a tub shower diverter that is not working properly?
To fix a tub shower diverter that is not working properly, you can try cleaning or replacing the diverter valve. First, shut off the water supply to the shower. Then, remove the diverter handle and the diverter valve. Clean the valve thoroughly to remove any debris or buildup that may be causing the issue. If cleaning does not solve the problem, you may need to replace the diverter valve with a new one. Reassemble the parts and test the diverter to ensure it is working correctly.
How do you remove old tub strainer from a porcelain tub?
With a tub strainer dumbell wrench.
