Can't be done unless we know WHAT glue it is ! - NAME your glue .
You cannot remove super glue from most fabrics without damaging the fabric.
To effectively release wood glue without damaging the surface, you can use a heat gun or a hair dryer to gently warm the glue, making it easier to peel off. Another method is to use a putty knife or scraper to carefully remove the glue without scratching the surface. Additionally, applying a small amount of vinegar or rubbing alcohol can help loosen the glue for easier removal.
Attach it with a glue
we use COPYDEX
To remove Gorilla Glue from your car without damaging the paint, first, gently scrape off any excess glue using a plastic scraper or credit card. Then, apply a small amount of rubbing alcohol or acetone to a soft cloth and dab it on the glue spot, allowing it to soften for a few minutes. Wipe the area gently until the glue lifts off, and finally, wash the area with soap and water to remove any residue. Always test the solvent on a hidden area first to ensure it doesn’t harm the paint.
Neoprene glue is used for rubber based items like wetsuits, rubber boats etc.
To remove hot glue from an iPhone audio jack, first ensure the device is powered off. Use a toothpick or a small, pointed tool to carefully pry away as much glue as possible without damaging the jack. You can also apply a small amount of isopropyl alcohol to a cotton swab and gently rub the area to help dissolve the glue. Avoid using excessive force to prevent damaging the audio jack.
To remove crazy glue from rubber, you can try soaking the affected area in warm, soapy water for a few minutes to soften the adhesive. Then, gently peel or scrape off the glue using a soft cloth or a plastic scraper. Alternatively, you can use a commercial glue remover specifically designed to dissolve adhesive bonds without damaging the rubber surface.
neoprene glue is best used on leather repairs
Difficult to say without knowing what exactly it is.-Name your glue -
If that glue is the remains of a double stick tape, try WD-40. Spray the area directly, let it soak then spray some on a clean cloth and gently rub the area.
To effectively undo wood glue without damaging the materials, you can use a combination of heat and a sharp tool. Apply heat to the glued area using a hairdryer or heat gun to soften the glue. Then, carefully use a sharp tool, such as a putty knife or chisel, to gently pry apart the glued surfaces. Be patient and work slowly to avoid damaging the wood.