answersLogoWhite

0

What else can I help you with?

Related Questions

How do you set a relic watch and it is not digital?

You pull out the crown once to change the date, twice the change the time


How do I set up the print to fax function on my computer?

Set up your multi-function printer to send faxes. Use the printer's control panel to enter your station ID. Insert documents you want to fax.


Where is the 3rd relic in the cellar in Anubis secrets within?

Okay, the relic is at the cellar. You enter under the stove in the kitchen. Once you're at the cellar don't leave 'cause the relic won't be there anymore the second time you go back and you'll have to exit the game and try again. The relic is at the upper rightmost part of the room. Victor is prowling around the table there so watch out and don't get caught. Alright, you're set. Good luck in getting the third relic.


How do you set the date and time on a Relic Watch?

Set the Day of the week and the Hour by pulling the stem out all the way, set the Day of the week out by pulling the stem out walf way. Set the Day of the week and the Hour by pulling the stem out all the way, set the day of the month out by pulling the stem out walf way.


What is a multi volume set?

A multi volume set is a set of something that includes more than one. For example a multi volume set of musical discs would have several discs included.


How do you set the alarm on your wr 50m watch?

To set the alarm on a WR 50M watch, usually you can press the "Mode" button until you reach the alarm mode. From there, you can press the "Set" button to configure the desired alarm time. Once you have set the alarm time, remember to save the setting and activate the alarm function.


How do you set a chronograph watch?

how do u set a chronograph watch?


What does tmr on a watch mean?

The term tmr on a wristwatch usually stands for the "timer". This is function is a common feature in most modern watches. It allows you to set a certain amount of time on the watch and when you press the designated start button the watch will count down, and when it reaches zero, it emits an audio alert (buzzer) to alert you that it has reached zero. This function also works in reverse. Wherein you set the watch to zero, press start, and the watch will count up until the designated stop/reset button is pressed.


How do you set a Charles Raymond watch time?

To set the time on a Charles Raymond watch, first, pull the crown (the small knob on the side) out to the second position. Turn the crown clockwise or counterclockwise to adjust the time to your desired setting. Once the correct time is set, push the crown back in to its original position to ensure the watch resumes normal function. Always ensure the watch is wound if it’s a mechanical model.


How it function using television set?

how it function using television set


What is the purpose of the second small hand on the Seiko chronograph watch?

The second small hand on a Seiko chronograph watch is typically the sub-dial used to measure elapsed time in seconds when the chronograph function is activated. It adds functionality to the watch, allowing for precise timing of short intervals.


If a set of ordered pairs is not a relation can the set still be a function?

If a set of ordered pairs is not a relation, the set can still be a function.