You use it to bend aluminum sheeting to wrap the trim.
To prevent condensation on house windows, you can improve ventilation, use a dehumidifier, and consider installing double-pane windows.
I would never recommend metal racks in glass pans . Both conduct heat at different levels and can cause the glass to brake. Please use metal racks in your metal pans .
If it is plastic, brake it. If it's metal, use a bomb
There is to much humidity in the house use a dehumidifier they can be expensive
replace brake line the damage to the line or if the jb weld gets into the line it will affect how the system works.
If you are replacing the brake lines ( metal ) then just use your better judgment. They do not have to follow the original route.
bar soap or wax
usually the metal clips are anti-rattle clips to keep the brake pads from chattering in the caliper when braking, they also act as retainers for the pads
100% acrylic will work on any windows. Aluminum should use a Direct to metal acrylic paint.
You can open the windows in your house and use fans. Or you can have you air repaired.
by making large windows for your house,keep your windows always open,plant trees in your surroundings or sprinkle water on the top of your house.
Window privacy film can be used to temporarily tint your windows. You can get a roll of it for about $30 at Walmart. You could use it to do your house windows, but you'd have to be really careful about cutting it out.