answersLogoWhite

0

A bundle of 3-tab ridge shingles typically contains about 20 linear feet of coverage. However, the exact amount may vary depending on the manufacturer and specific product design. It's always best to check the packaging or product specifications for precise measurements.

User Avatar

AnswerBot

6mo ago

What else can I help you with?

Related Questions

How many square in a ridge cap bundle?

Not really sure how many square, but a bundle of ridge cap normally covers 25 lineal feet. since cap dosent really cover any area ive never figured how many square it covers. hope this helps---------------------------------------------A square is 100 square feet of covered area, but knowing how many squares there is in a bundle of ridge caps is not of much value. It is important to know how many feet of ridge can be covered with a bundle.


How many 3 tab shingles needed for starter and ridge shingles 72 feet?

For a roofing project using 3-tab shingles, the starter course typically requires about 1 bundle of shingles for every 30 linear feet. For 72 feet, you would need approximately 2.5 bundles for the starter course. Ridge shingles are generally installed at a rate of 1 bundle per 20 linear feet, so for 72 feet of ridge, you would need about 3.6 bundles. Therefore, you would need a total of about 6 bundles for both the starter and ridge shingles combined.


How many linear feet does a bundle of starter shingles?

Depending on which manufacturer of starter shingles you prefer, you will get 100 linear feet, give or take a couple of feet for some brands. If using 3-tab shingles as a starter shingle, you will get roughly 78 linear feet per bundle.


How many linear feet does abundle of 3 tab cover for capping?

A bundle of 3-tab shingles typically covers about 33.3 square feet. When calculating linear feet for capping, it depends on the length of the roof's edge. Generally, if you're using 3-tab shingles for capping, you would need to determine the total linear feet of the edge to be capped and divide by the coverage per bundle to find how many bundles are required.


How many ridge caps for a 20' ridge?

2/3 of a bundle of shingles which has approx. 22-23 shingles


How many linear feet are in 133 feet?

Linear feet are the same as feet, so the answer is 133 linear feet!


How many linear feet are in 72 feet?

72 feet is already linear as feet is linear so answer is 72


How many feet are in 4500 linear feet?

There are 4,500 feet in 4,500 linear feet.


How many feet in 60 linear feet?

Feet and linear feet are the same measurement. Therefore, 60 linear feet is equal to 60 feet.


How many feet are there in 500 linear feet?

Feet and linear feet are the same measurement. Therefore, 500 linear feet is equal to 500 feet.


How many feet is 12 linear feet?

Linear feet are the same as feet so the answer is 12 feet.


How many feet are in 84 linear feet?

A foot IS a linear measure so a foot is a linear foot. So 84 linear feet is 84 feet.