answersLogoWhite

0

The average 9inch brick will take a good bricklayer some 10 seconds to lay and square.

User Avatar

Wiki User

11y ago

What else can I help you with?

Related Questions

How much should you charge per brick?

The price could range from about $1 (for standard clay bricks) to $400,000 (for gold bricks).


Where does grasshoppers lay there eggs?

In bricks


How many bricks would you lay to cover 100 square feet?

metric common 60 bricks / sqm imperial common 52 / sq m


What is correct usage of laying?

The verb lay means to "cause (something) to lie." It must always have a direct object. We may be laying bricks, but the bricks do not lay: they lie.


How many bricks can a bricklayer lay in a day?

i am 20 and been brickin since i was 16 . i can lay around 1200 face bricks a day. and if im blockin i lay about 400 blocks a day. in a about a day I can lay 7 chicks with a little weeeneerr


How much sand and cement do you need to lay 8000 bricks?

To lay 8,000 bricks, you typically need about 1.5 bags of cement per 1,000 bricks, which amounts to approximately 12 bags of cement. For sand, a common mix ratio is about 0.5 cubic yards per 1,000 bricks, leading to around 4 cubic yards of sand for 8,000 bricks. This may vary depending on the size of the bricks and specific mortar mix used, so it's advisable to consult local guidelines or a professional for precise calculations.


How many 3x8 inch bricks would you need to lay for a 12x16 patio?

between 1100 and 1200 bricks


How much should you charge to lay tile in Oklahoma?

fifteen dollars an hour


If 10 men take 6 days to lay 1000 bricks then how many days will it take 20 men working at the same rate to lay 5000 bricks?

15 days


What is the answer to this question You have 26 bricks. You want to use as many bricks as you can to build a step. If you lay the bricks in 5 equal rows, how many will you have left I know!?

1 brick.


How much morter to lay 100 bricks?

The amount of mortar needed to lay 100 bricks typically varies based on the size of the bricks and the thickness of the mortar joints. On average, you can expect to use about 1 cubic foot of mortar for every 100 bricks. Thus, you would need approximately 0.2 to 0.3 cubic feet of mortar for laying 100 standard-sized bricks, depending on the joint size. It's always best to consult specific guidelines or calculations based on the brick type and project specifics.


It took 1 hr for qwer to lay 150 bricks he always works at the same speed how long will it take qwer to lay 720 bricks give your answer in hours and minutes?

4 hours and 48minutes