0
What else can I help you with?
What is the best way to re roof. Leave the old shingles and cover it with the new one or strip old shingles?
If there is only one set of shingles on the roof, cover over it. If two, remove the old and then apply the new.
How do you take dips out of your roof to put new shingles on?
Strip off the old roofing and decking and replace it with thicker plywood, then apply the asphalt paper and re-shingle.
How much does it cost to re roof a house?
Huge # of variables on thisWhere you live and the code the roof must adhere to, Miami must survive hurricane's, Where I live the code deals with Ice dams and snow load.Whats wrong, 1100 square foot house strip and re-shingle where I live was $3000 to $4000 last summerHips and valleys cost moreRepairs and upgrades cost a bunch, does it need sheeting? (new plywood)
Can the winning driver of a NASCAR stand on the roof?
no, you will be strip of the win
How can I effectively install a roof water diverter strip to prevent water damage to my home?
To effectively install a roof water diverter strip to prevent water damage to your home, follow these steps: Start by cleaning the area where the diverter strip will be installed to ensure proper adhesion. Measure and cut the diverter strip to the appropriate length for your roof. Apply a generous amount of roofing sealant to the back of the strip. Press the strip firmly onto the roof, making sure it is securely in place. Allow the sealant to dry completely before testing the diverter strip with water to ensure it is diverting water away from your home effectively.
How do you clean the oxidation off the zinc strip on a roof?
This will have to be sanded off. After the oxidation has been removed the strip should be sealed with a sealer.
How much should it cost to re shingle a roof that takes 10 squares of shingles?
6 to 12,000 dollars depending on the work involved. Materials for a complete roof replacement run about 6,000 alone.
Our roof has an old one underneath... We need to re-roof.. what is the best way to do this?
With two roofs already on the house, you really should strip both of them off before installing the new one. Actually, if you live in an incorporated area that has a building code enforcement bureaucracy, you may have to. Check your local building codes.
What is a shiver bar?
A shiver bar is a small, narrow strip of wood that is used to attach the ends of roof thatching to the roof's surface. It helps to secure the thatch in place and provides a neat finish to the roof.
Do you remove the plastic strip on shingles?
No. It is perfectly fine to leave the plastic strip on. The strip is there to keep the shingles from sticking together in the bundle. Try to remove this strip while doing a ten or fifteen square roof and watch your time a frustration rise.
Price to shingle 1000 sq ft roof?
A total strip and repair here runs about $5K
What is an environmentally friendly way to treat and prevent moss on the roof?
A copper strip on both sides of the ridge.
