0
To spool a Black and Decker Grasshog weed trimmer, first, unplug the trimmer for safety. Open the spool cover by pressing the tabs or using a screwdriver, then remove the empty spool. Take a new spool of trimmer line, thread the line through the eyelet and wind it around the spool in the direction indicated by the arrows, leaving a few inches free. Finally, reinsert the spool into the trimmer, pull the line through the exit port, and close the spool cover securely.
What else can I help you with?
Which trimmer has the best system for changing the string?
Black & Decker's Automatic Feed System is the best for advancing the string.The Poulan Pro Spool is best spool if you have a low tolerance for nuisance in changing and untangling.
How do you restring a grasshog weedeater?
To restring a Grasshog weedeater, first, disconnect the power or remove the battery for safety. Open the spool cover by pressing the tabs or turning it, then remove the old line. Cut a new length of trimmer line (typically about 10-15 feet), insert it into the spool, and wind it in the direction indicated on the spool. Finally, thread the line through the eyelets on the head and reassemble the spool cover.
How do you get the Grasshog trimmer auto feed to work?
To get the Grasshog trimmer's auto feed to work, ensure that the trimmer is properly assembled and that the spool is loaded with the correct line. Turn on the trimmer and allow it to run at full speed, as the auto feed typically engages when the head is spinning fast enough. If the line doesn't feed automatically, gently tap the trimmer's head on the ground while it's running to release more line. Always refer to the user manual for specific instructions related to your model.
Black and decker grass hog manual?
The Black and Decker grass hog manual can be received from the Black and Decker Company. You can call the Black and Decker hotline to request one.
How can I restring a Ryobi string trimmer?
To restring a Ryobi string trimmer, first remove the spool from the trimmer head. Cut a length of new trimmer line, thread it through the holes in the spool, and wind it evenly around the spool. Reinsert the spool into the trimmer head, and feed the line through the trimmer head eyelets. Finally, secure the spool back in place and trim any excess line.
How do you change the trimmer line on a Ryobi Expand-It?
To change the trimmer line on a Ryobi Expand-It, first remove the spool cover, then take out the spool and replace the trimmer line following the arrows on the spool. Finally, reassemble the spool cover.
What is the best way to replace the weed trimmer string on a trimmer?
To replace the weed trimmer string on a trimmer, follow these steps: Turn off the trimmer and disconnect it from the power source. Remove the spool housing by pressing the tabs on the sides and pulling it out. Take out any remaining old string from the spool. Cut a length of new trimmer string according to the trimmer's specifications. Insert the ends of the string into the holes on the spool. Wind the string evenly and tightly around the spool in the direction indicated on the spool. Reassemble the spool housing and reconnect it to the trimmer. Test the trimmer to ensure the string is working properly.
How do you wind a Ryobi weed wacker spool?
To wind a Ryobi weed wacker spool, first remove the spool from the trimmer. Then, wind the trimmer line around the spool in the direction indicated on the spool. Make sure to evenly distribute the line and avoid overlapping. Finally, reattach the spool to the trimmer and you're ready to use it.
How can I replace a line in a Ryobi trimmer head?
To replace a line in a Ryobi trimmer head, first, remove the spool from the trimmer head. Then, unwind any remaining line and clean the spool. Cut a new piece of trimmer line to the appropriate length and insert it into the spool, following the arrows for the correct winding direction. Finally, reassemble the spool back into the trimmer head.
How can I replace the trimmer line on my Ryobi cordless trimmer?
To replace the trimmer line on your Ryobi cordless trimmer, follow these steps: Turn off the trimmer and disconnect the battery. Remove the spool cover by pressing the tabs on the sides and pulling it off. Take out the spool and remove any remaining old line. Cut a new piece of trimmer line to the appropriate length. Insert the line into the spool, following the arrows for the correct winding direction. Reassemble the spool and spool cover, then reconnect the battery and turn on the trimmer.
How do I perform a Ryobi trimmer string replacement?
To perform a Ryobi trimmer string replacement, first turn off the trimmer and disconnect the spark plug. Remove the spool cover and take out the old string spool. Cut a new piece of trimmer line to the appropriate length and insert it into the spool. Wind the new line evenly onto the spool in the direction indicated on the spool. Reassemble the trimmer and test the new string before use.
How do I restring a Ryobi gas trimmer?
To restring a Ryobi gas trimmer, first remove the spool from the trimmer head. Cut a length of new trimmer line, usually around 10 feet, and insert one end into the hole in the spool. Wind the line evenly and tightly around the spool in the direction indicated on the spool. Leave a few inches of line unwound, then thread the line through the eyelet on the trimmer head. Reattach the spool to the trimmer head and trim any excess line.
