answersLogoWhite

0

1-1/2" x 7-1/4"

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

How many square feet in a 1x6x8 foot board?

To calculate the total square footage of a 1x6x8 foot board, you first need to find the surface area of one side of the board. Since the board is 1 foot wide and 8 feet long, the area of one side is 1 x 8 = 8 square feet. Since there are two sides to the board, you would multiply the area of one side by 2 to get the total surface area of the board, which is 8 x 2 = 16 square feet.


Lumber bd ft conversion?

According to F.W. Honerkamp Co. Inc., the aswer is as follows: The unit of measurement for hardwood lumber (bd.ft. or BF). A board foot is the amount of lumber in a board one foot long, one foot wide, and one inch thick before milling. The formula for determining the board feet in a board is: (Width in inchesx length in feet x thickness in inches) / 12 = BFFor example:a board 8" wide, 12' long and 1" thick would contain 8 board feet.(8" wide x 12' long x 1" thick) / 12= 8 board feet.


How do you figure linear feet in a room that is 25 feet by 25 feet?

That depends on how wide your board is. A six inch wide board will need 25 x 25 x 2 (1250) linear feet to cover the area. A three inch wide board will need 25 x 25 x 4 (2500) linear feet to cover the area.


What is the weight of a 2 x 8 x 8 foot pine board?

To calculate the weight of a 2 x 8 x 8 foot pine board, first determine its volume in cubic feet: 2 inches (0.167 feet) x 8 inches (0.667 feet) x 8 feet = approximately 0.889 cubic feet. Pine typically weighs about 30 to 35 pounds per cubic foot, so the weight of the board would be around 27 to 31 pounds.


What is the surface area of a box if its 10ft long 8 ft wide and 8 ft high?

2 x 10 x 8 = 80 (top and bottom)2 x 10 x 8 = 80 (2 sides)2 x 8 x 8 = 64 (2 ends)80 + 80 + 64 = 224 cubic feet


How wide is a 2 x 6 board?

If the longest side of 6 feet, and the narrowest side is 2 feet, then the area is 6 x 2 = 12 square feet.


What are the dimensions of each rectangle that can be made from 32 tiles?

There are three rectangles. 1 wide x 32 long 2 wide x 16 long 4 wide x 8 long.


What is boardfoot?

A board 1 inch thick and 12 inches square is 1 board foot. Any combination of these measurements is 1 board foot. A board 2 inches thick, 6 inches wide and 12 inches long is 1 board foot. For instance, to calculate the board feet in a beam that measures 6" wide x 8" high x 10' long the formula is 6x8x10/12=40 bf . Likewise, a 2"wide x 10" high x 10' long piece of lumber is calculated 2x10x10/12=16.66 bf. So a 1x12x12 would calculate 1x12x12/12=12 bf. All board footage is calculated on rough dimensions, so even though a 2x10 S4S measures only 1 1/2"x 9 1/4" the board footage is calculated by multiplying 2 times 10 times the length divided by 12.


Would a flop of 88762 qualify for Omaha low?

The "flop" consists of the first three cards. A board of 8-8-7-6-2 would be a qualifying board for Omaha 8. Think of it in terms of three unmatched that are 8 or lower (A, 2, 3, 4, 5, 6, 7, 8). With that particular board, A-3-x-x would be the best possible low (A-3 in your hand, 7-6-2 from the board). - Bdx


How big is a beer can?

A regular, 12oz beer can is 4 1/2"high X 2 3/8" wide X 8" circumference.


What is the actual dimension of a 1 x 8 board?

Typically it would be 3/4 X 7-1/2.


How much dirt is needed to fill 8 feet long by 2 feet wide by 9 inches tall?

12 cubic feet. 8 x 2 x .75