Yes you can if you first rough up the ceramic by sanding it. Use a vinyl mastic like Mapei Unibond.
A propriatory epoxy resin. Check out your hardware/do it yourself store.
Depends on the surface you are sticking it to. I would start with a tile mastic glue.
All the answers I see refer to the newer 'vinyl windows' not the older lanai windows that held vinyl fabric instead of glass. I also need info on this...
Not directly as the ceramic tiles will soon show through the vinyl flooring. If the ceramics are laid on a wooden floor, you must take up the tiles and overboard with 6mm plywood. If the tiles are on a concrete floor, you can leave them down and lay a latex screed on top to provide you with a smooth floor for your vinyl
I wouldn't it might damage your records I would use alcohol instead it won't harm your vinyl records.
When any material is welded it is melted. To join two pieces the edges are melted and allowed to fuse together or a filler is added, usually of the same material.
It depends where the lino is. If it is a trailer, yes, use glue. Lots of glue.If its in your house, I think gluing around the edges is a good idea, if not the whole thing.ANS 2 -The location doesn't matter. If it's good quality thick lino it will not need gluing . If it's cheap thin lino then it must be glued with a good vinyl glue.
Linseed oil is not recommended for refinishing vinyl shutters, as it can lead to a sticky residue and may not adhere properly to the vinyl surface. Instead, it's best to use products specifically designed for vinyl, such as vinyl-safe paints or coatings. These alternatives will provide better adhesion and durability while preserving the appearance of the shutters. Always ensure proper cleaning and preparation of the surface before applying any finish.
Acetylene is mainly used as a fuel in oxy-acetylene welding and cutting processes due to its high flame temperature. It is also used in the production of organic chemicals such as ethylene and vinyl chloride. Additionally, acetylene is used in the synthesis of various compounds like acetic acid and acetaldehyde.
Vinyl seats? Vinyl roof? Vinyl dash pad? Vinyl door panel?
No, vinyl is unaffected by moisture as it does not retain or is generally affected by moisture. If this is occurring to you, it may be that the subfloor underneath the solid vinyl plank (or whatever is underneath the plank) is peaking instead.