answersLogoWhite

0

According to NFPA 211 (The national standard for fireplaces) Chimneys SHALL stand 3' above the roofline AND 2' above anything within 10' (This is the 3-2-10 rule)

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

How tall is a two story chimney?

The height of a two-story chimney typically ranges from 20 to 30 feet, depending on the height of each story and the design of the chimney. A standard story is usually about 10 to 15 feet tall, so a two-story chimney would be constructed to accommodate this height. Additionally, factors such as the chimney's location, building codes, and architectural style can influence its final height.


What is the standard height of boiler chimney?

The standard height of a boiler chimney typically ranges from 15 to 30 feet above the roofline, but it can vary depending on local building codes, the type of boiler, and the specific requirements of the installation. Generally, the chimney should be tall enough to ensure proper draft and to prevent exhaust gases from re-entering the building. Additionally, factors such as the height of surrounding structures and prevailing wind conditions may influence the final chimney height. Always consult local regulations and manufacturer guidelines for specific requirements.


What y designates in asme y14.5?

ASME having standards from A to Z .Y is the standard series for design series.


What is the meaning of 5L in API5L?

It is ASME standard for piping


What is asme standard number for manhole?

The ASME (American Society of Mechanical Engineers) standard that pertains to manholes is ASME B31.3, which covers the design and fabrication of piping systems, including manholes. For specific manhole designs and requirements, ASME also references standards like ASME B16.5 for flanges and ASME B16.47 for large diameter flanges. It's essential to consult the relevant sections of these standards for detailed specifications related to manholes in piping systems.


Why to place chimney at height?

Placing the chimney at a height - directs the waste gasses etc away from people - and allows the wind to disperse the smoke.


What is the explanation of sa 105?

It is an ASME Standard for Carbon stell forgings, rounds


What is the minimum height required for chimney of 100 KVA DG Set which is kept in?

What is the minimum height required for chimney of 100 KVA DG Set which is kept in


What is the difference in a105 and a106 pipes?

Simply, A105 is an ASTM standard for a ratedsteel where SA105 is the ASME standard for (nominally the same) rated steel. Basically, they are the same, although SA105 has additional applications beyond A105 according to ASME standards.


PN16 flange is equivalent to which ASME?

The PN16 flange is equivalent to either the ASME 150 or 300. The PN is related to Nominal Pressure and the ASME is the standard for the American Society of Mechanical Engineers.


Is the ASME B31.3 test open book?

The ASME B31.3 code is not an exam but a standard for process piping design. However, if an exam is based on the content of ASME B31.3, it is typically closed book to assess the candidate's knowledge and understanding of the code without reference materials.


How high is a chimney whose shadow is 28 meters long when a 5 foot gate casts a 12 foot shadow?

Ratio shadow:real height for gate = 12ft:5ft = 2.4 So ratio for chimney = 28:real height = 2.4 Height of chimney = 28/2.4 = 11.66... ft