0
2. Check that machine guards are in position.
3. Do not leave equipment on top of the machine.
4. Ensure cutter is in good condition and securely mounted.
5. Locate and ensure you are familiar with the operation of the ON/OFF starter and E-Stop (if fitted).
6. Faulty equipment must not be used. Immediately report suspect machinery.
OPERATIONAL SAFETY CHECKS1. Keep clear of moving machine parts.
2. Never leave the machine running unattended.
3. Do not leave equipment on top of the machine.
4. Follow correct clamping procedures- keep overhangs as small as possible and check work piece is secure.
5. Ensure you have selected correct speed and rate.
6. Ensure you have set the correct depth of cut.
7. Before making adjustments and measurements or before cleaning swarf accumulations switch off and bring the machine to a complete standstill.
HOUSEKEEPING1. Switch off the machine.
Leave the machine and work area in a safe, clean and tidy state
What else can I help you with?
What is needed to begin to work any machine?
To begin working any machine, you typically need to have a basic understanding of its operation, read and follow the user manual or instructions, ensure the machine is in proper working condition, and take necessary safety precautions such as wearing appropriate protective gear.
What are three methods of shaping steel?
milling, turning and shaping on a shaping machine .
Working principal type description operation of shaping machine?
there are two stroke include in this forward stroke &return stroke during the forward stroke machine works means it removes the material from workpiece & during the return stroke machine remains idle
What is the advantage sannsect on a shaping machine?
everything
What are the safety and precautions for calcium?
The safety precautions that should be used when working with calcium depend on the form of calcium you are working with, what you will be doing with it, and how much you will be handling.
What is the difference between a shaping machine and a slotting machine?
Shaping machine will perform operations only on the surface of the work piece. It only does surface smoothness. Where as the slotting machine will perform operations like making keyways in shafts etc...
How can I flatten wine bottles?
To flatten wine bottles, you can use a kiln or a glass fusing machine. Place the bottle in the kiln or machine and heat it to a high temperature until it becomes flat. Be sure to follow safety precautions when working with hot glass.
What is the machine called for melting acrylic?
A machine commonly used for melting acrylic is called a heat gun. It uses hot air to soften and melt acrylic materials for various applications such as bending, shaping, or welding. It is important to follow safety precautions when using a heat gun to prevent burns or fire hazards.
Safety precautions in drilling machine or drilling press?
drilling press
What safety precautions can you take when working in a factory?
What safety precautions you can take when working in a factory depends on what is done in the factory and how it is done. An answer to such a general question would usually fill several books.
Safty on a sewing machine?
There are some safety features on sewing machines. For example, some stop working if the presser foot is not down or the electrical is not hooked up correctly. You should take precautions yourself, such as never leaving the machine on around children and keeping your hands away from the needle.
Precautions that should be observed when working with sheet metals?
There is a few precautions you should take when working with sheet metal. You should always wear safety glass, wear gloves an pay attention.
