I suggest you contact a local repairer, in Thomson or Yell.com etc. look under heading
"Double Glazing Repairs". or if you can remove it from the window, and identify if its an espagnolette type (when you turn the handle it moves several locking cams) or a cockspur handle, which just catches on to the frame. Once you have identified it your half way their, look for any marking or Logo's etc, do a search on the net thru catologues etc.
when you lock a car door it can not be opened from the outside, ( unless it is picked ), when you double lock it you can not open the door from the inside in the event of someone breaking a window to gain entry.
NO!!!!!!!!!!!!!! DO NOT DO THIS!!!!!!!!!!!! Take it to a gunsmith for proper repair.
Need to know what's wrong with it. More info please.
To replace the lock on an Anderson casement window, first, remove the window handle and any screws holding the lock in place. Carefully detach the old lock from the frame. Align the new lock with the existing holes, secure it with screws, and reattach the window handle. Finally, test the lock to ensure it functions properly.
To lock a casement window open, first, fully open the window to your desired position. Then, locate the window's locking mechanism, which may be a small lever or a rod. Engage the lock by pushing or turning it, securing the window in place. If your window has a removable pin or bracket, insert it in the designated hole to prevent the window from closing.
The rear window lock on the 2000 Blazer might have gotten rusty and will not turn to unlock the window. Try spraying a lubricant like WD-40 into the door lock. Wait a few minutes and then try the key in the lock.
To effectively lock a window from the inside to enhance security in your home, you can install a window lock or latch. These devices can be easily attached to the window frame and can be locked or unlocked from the inside. Make sure to choose a sturdy lock that is difficult to tamper with from the outside. Additionally, consider reinforcing the window glass with security film or bars for added protection.
Lock repair Lock replacement Rekeying Lock installation Program new car keys
To replace the lock on a vent window of a 1991 Jeep Cherokee, first, remove the vent window by carefully prying off the trim and unscrewing any fasteners. Once the window is out, disconnect the old lock mechanism by removing screws or clips holding it in place. Install the new lock by securing it in the same position and reassemble the vent window. Finally, test the lock to ensure it operates smoothly before reinstalling the trim.
yes.
Window or pick the lock
One way to lock the window in place without using screws is to cut small blocks of wood and place them on top of the window, between the lower window and the upper frame.