0
What else can I help you with?
If you are building a garage how can you fix it without starting over if you are to the point that the trusses should go up but the frame is out of square?
First, if you have not installed the wall sheating you should be able to force your framing back to square with the use of tempory bracing.Bracing should be used to keep framing square and plumb.It should be install on the interior as to allow the wall sheathing to be installed with bracing in place.I suggest plywood sheathing at least on all corners. This helps keep the framing square and plumb. Do not remove any bracing until all wall sheathing,trusses and roof sheathing have been installed.This is very important as the structure could collapse with out it.Also the trusses will need to be cross braced as they go up.
Do you nail windows to the studs or sheathing?
There should be studs around the window opening so you would be doing both. If you are asking when to do it, the windows go on top of the sheathing.
Can Tyvek house wrap be installed over backer board that is attached directly to the sheathing or should it be installed directly over the sheathing and the backer board over it?
If you are talking about a fiber cement backer board, the manufacturer of the board should provide the answer you are after. I am currently using Hardiplank to reside my house, and the manufacturer recommends attacheing the TyVek house wrap to the wood sheathing per TyVeks recommended process. Hope this helps.
Which windows should be installed first Windows 200 or Windows XP?
Start with windows 2000 then windows xp.
Do you need to use plywood with DuroFoam sheathing on exterior walls in new construction?
After framing a house you will have to either put plywood or particle board on the exterior walls of the new construction. Then you must put a sheathing on top of that. There are many different types of sheathing availabe and you should choose one that fits your needs. There are no codes that say you have to use one particular type of sheathing, unless of course the home owner requires Duro Foam.
How do you complete a sentence that begins with 'Electrical wire sheathing should not'?
Electrical wire sheathing should not project more than about one inch into the electric panel.
How do you complete a sentence that begins with 'Electric wire sheathing should'?
Electric wire sheathing should not project more than one inch into the electric panel.
How does one determine which Windows Vista service pack is installed?
Finding out which Windows Vista service pack is installed is fairly simple. Go to Start, Control Panel, System Maintenance and then the System link. It should show which pack is installed.
When you start your PC the windows xp is not starting it installed on C drive and windows server 2003 is installed on drive D but server 2003 start immediately .what should we do?
You'll need to edit boot.ini and add an entry for Windows XP.
How much ram should be required for Windows XP to run like windows 7?
Windows XP can never "run like Windows 7", regardless of the amount of RAM installed.
What is the correct way to install purlins in metal building construction?
In metal building construction, purlins should be installed perpendicular to the primary framing members, ensuring they are spaced according to the design specifications and local building codes. It is essential to secure them using appropriate fasteners and clips, ensuring a tight fit to support roof panels or sheathing. Alignment should be checked for level and plumb to maintain structural integrity. Additionally, all connections should be adequately sealed to prevent water infiltration.
Can Windows XP be installed on a Windows 95 computer?
If the hardware is compatible and you have enough memory you should be able to purchase an "Upgrade" version of XP.
