0
If I give you an off the floor measurement, you'll only get in trouble.
Walls and floors are never straight or level or plumb and if you don't have a laser level that spins,
you'll never find the high points.
I know Norm Abrams puts the tops up first, but he's got 90 guys on his crew and every tool ever invented.
You, unfortunately, live in the real world.
There should be a minimum of 18 inches between the top of the counter and the bottom edge of the cabinets.
FIND ALL THE STUDS IN THE WALL, top and bottom.
Set you bases first, get them in line and leveled with strips of shingles underneath.
A counter top will be between 1 1/8" and 1 1/2" thick. You'll need to know how thick before you set the top cabinets,
It would be a good idea to set the counter top now in case it needs to be scribed (fitted) to the wall.
Cover the countertop with a tarp or pad so it doesn't get scratched and make up a couple of posts 18" tall out of scrap lumber. They don't have to be pretty but they do have to be sturdy. A couple of 1' square pieces of plywood with a 2 x 4 between them will be fine.
Rest the top cabinets on these as you install them, it will make life a lot easier.
The top cabinets should be mounted plumb over the base cabinets, so start some place in the middle.
Plumb a line up from a base cabinet with a level and work your way out to either end.
Remember to check the height of the refrigerator before you install the cabinet that goes over it.
What else can I help you with?
What are the dimensions and weight capacity of the long wall cabinet you are considering for purchase?
The long wall cabinet measures 36 inches in width, 12 inches in depth, and 24 inches in height. It has a weight capacity of 50 pounds.
What are the dimensions and installation requirements for a wall medicine cabinet?
The dimensions of a wall medicine cabinet typically range from 15-30 inches in width, 20-30 inches in height, and 4-6 inches in depth. Installation requirements include finding wall studs for support, ensuring the cabinet is level, and securing it with screws.
Is the depth of a refrigerator taken based on the unit dimensions or how far it protrudes from the wall?
Refrigerator depth is measured from the front of the cabinet (not including the handle) to the back of the coils. You will also need to allow for at least 1" clearance to the wall.
What are the dimensions and specifications required for installing a wall oven cabinet in a kitchen renovation project?
The dimensions and specifications needed for installing a wall oven cabinet in a kitchen renovation project include the width, height, and depth of the cabinet, ensuring it fits the oven's size. The cabinet should have proper ventilation and electrical outlets for the oven. It must be securely anchored to the wall and floor to support the weight of the oven.
How can I safely remove a cabinet from the wall?
To safely remove a cabinet from the wall, first empty it of any contents. Then, unscrew the cabinet from the wall studs using a screwdriver or drill. Have someone help support the cabinet as you remove the screws to prevent it from falling. Once the cabinet is detached, carefully lift it off the wall and set it aside.
How can I ensure that my cabinet is installed flush with the wall?
To ensure your cabinet is installed flush with the wall, use a level to check for evenness, shim the cabinet if needed, and secure it tightly to the wall studs with screws.
How can one attach a lateral filing cabinet to a wall?
One can attach a lateral filing cabinet to a wall by choosing a right location, creating guide holes, removing drawers before fastening the cabinet to the wall.
What are the best installation tips for a kitchen wall cabinet?
When installing a kitchen wall cabinet, make sure to find and mark the studs in the wall for secure attachment. Use a level to ensure the cabinet is straight and even. Pre-drill holes before screwing the cabinet into the wall to prevent splitting. Consider using shims to adjust the cabinet for a perfect fit.
State a suitable fixing device to secure a wall cabinet to a hollow patition wall?
I would run 1x2 furring strips horizontal along the wall where the cabinet is to be installed, 1 at the height of the top of the cabinet and 1 at the bottom, then screw the cabinet into the furring strip.
How to remove a cabinet from the wall effectively?
To remove a cabinet from the wall effectively, first empty the cabinet and remove any shelves or contents. Next, locate and unscrew the screws or bolts securing the cabinet to the wall. Use a screwdriver or drill to carefully remove the fasteners. Finally, lift the cabinet off the wall and have someone help you if it is heavy. Make sure to patch up any holes left in the wall from the screws.
How can I securely attach a cabinet to a wall?
To securely attach a cabinet to a wall, you can use wall anchors or screws to fasten the cabinet to the wall studs. Make sure to locate the studs using a stud finder, and use the appropriate hardware for the weight of the cabinet. Additionally, consider using brackets or L-brackets for extra support. Always follow the manufacturer's instructions for installation to ensure the cabinet is securely attached to the wall.
What are the dimensions and specifications required for installing a wall oven base cabinet in a kitchen?
The dimensions and specifications needed for installing a wall oven base cabinet in a kitchen typically include a width of 30-36 inches, a height of 28-34 inches, and a depth of 24 inches. It should have a sturdy construction to support the weight of the wall oven and be located near a power source for electrical connection. Additionally, proper ventilation and clearance space around the cabinet are important for safe and efficient operation of the wall oven.
