0
The foundation and the roof are the most important parts of any house. These are not the areas in which you want to cut corners.
If you are going to install a new roof then you need to find qualified professionals and do the job right.
Patching might get you through a month or so, but you will want to replace the entire roof at some point, including the metal pipes and vents. The roof is really just one unit and you can’t piece it together over time.
Using good, 30-year architectural shingles will mean that this is an ordeal you won’t have to go through again for a very long time.
If all of the signs are pointing to needing to replace a roof then more than likely you will need to bite the bullet and get it done.
The damage from an older roof can grow to wreak havoc on the rest of the house. If you are going to continue to live in the house then you will have to address that problem.
You could also lose your homeowners insurance due to a poor roof.
Lastly, it will be hard to find a homebuyer willing to take on the task. Though you might have some luck selling your house to an investor. They are willing to deal with the roof situation themselves.
Contact us at 901-250-0100.
What else can I help you with?
What are the key steps involved in an asphalt roof installation?
The key steps involved in an asphalt roof installation include preparing the roof surface, installing underlayment, laying down the asphalt shingles, securing them with nails, and finishing with flashing and ridge caps.
What are the key steps involved in asphalt shingle roof installation?
The key steps in asphalt shingle roof installation include preparing the roof surface, applying underlayment, installing starter shingles, laying the shingles in rows, cutting shingles as needed, securing shingles with nails, and finishing with ridge caps.
How much would it cost to level of a roof then put a deck on it?
It all depends on the type of existing roofing that is going to be demolished and the replacment with a deck. If the roof is flat it is cheaper but if the roof has a slope then a whole new flat roof is required to support the deck.
How can I tie a new roof into my existing roof structure seamlessly?
To tie a new roof into your existing roof structure seamlessly, you should ensure that the pitch and materials of the new roof match the existing roof. Consult with a professional roofer or architect to create a detailed plan for integrating the new roof, including proper flashing and sealing techniques to prevent leaks and ensure structural integrity.
Can i install metal roofing on my house?
Depending on your location, if the metal roof is going to be more durable and sturdier than your existing roof, you will need a permit. Also if the metal roof is going to heavier than your existing roof, it will require a permit.
How can I tie in a new roof to an existing roof?
To tie in a new roof to an existing roof, you will need to carefully align the new roof with the existing one and ensure that the materials and slopes match. It is important to properly flash and seal the connection point to prevent leaks and ensure structural integrity. Consulting with a professional roofer is recommended to ensure the job is done correctly and safely.
How can one install roof flashing?
One can install roof flashing by various steps. You can find these steps on several websites. A website you can look on for installing roof flashing is YouTube.
How can I tie a new roof into an existing roof to ensure structural integrity and proper water drainage?
To tie a new roof into an existing roof for structural integrity and proper water drainage, you should consult with a professional roofer or structural engineer. They can assess the existing roof's condition, design a plan to integrate the new roof, and ensure proper flashing and sealing to prevent water leaks. It is important to follow building codes and regulations to ensure a safe and effective roof integration.
When is it time to put a new roof on an existing home?
most roof replacements are around 15 to 20 years. your location and climate will dictate how the shingles wear. you will need to check with your local building dept. th see what is required by code for your area.
How do you install roof drain overflows?
By placing a scupper 2"- 4" above the roof surface at the lowest point near the existing roof drain
What steps should I take for a leaky roof?
You will need to check your roof for gaps, spaces or damaged shingles and take steps to repair them. Inspecting an older roof is an important thing to do to keep them from leaking and damaging your home.
On a new roof with a 1012 pitch is roof felt tar paper still required?
Paper the whole roof!
