0
Depends a bit on what has been cast. A lump of gold or iron is an ingot, but if cast into a specific shape (like a model car) it would be a casting (not usually gold though!)
What else can I help you with?
What is the definition of the word mold an cast?
A mold is a form into which molten metal is poured. When the metal hardens, it takes the shape of the mold. This process is called casting.
What is a piece of metal cast from a mold called?
Depends a bit on what has been cast. A lump of gold or iron is an ingot, but if cast into a specific shape (like a model car) it would be a casting (not usually gold though!)
What is the meaning of ingot?
That in which metal is cast; a mold., A bar or wedge of steel, gold, or other malleable metal, cast in a mold; a mass of unwrought cast metal.
What is a piece of cast metal obtained from a mould in a form suitable for storage?
A casting is a piece of metal formed by pouring molten metal into a mold and allowing it to cool and solidify. Castings are commonly used in manufacturing to produce complex shapes and components.
What the meaning of ingot?
That in which metal is cast; a mold., A bar or wedge of steel, gold, or other malleable metal, cast in a mold; a mass of unwrought cast metal.
How can I make a mold for metal casting?
To make a mold for metal casting, you can use a material like sand or plaster to create a negative impression of the object you want to cast. Once the mold is made, you can pour molten metal into it and let it cool and solidify. After that, you can remove the mold to reveal the metal casting.
What is lost-wax cast?
Lost wax casting. You make something out of wax, jewelry or something similar and attach one or more strips that will act like tubes when the wax is melted out of the mold. You put the piece in a metal container of the right size and pour plaster around it. After the plaster sets, you heat it so that the wax will run out. After this, you melt metal, gold or silver and pour it in the mold or there is a centrifugal caster that forces the molten metal into the mold and gives a better casting. With the mold hot from melting the wax out and the hot metal, you put it in water and the plaster blow off of the piece.
What is lost cast waxing?
Lost wax casting. You make something out of wax, jewelry or something similar and attach one or more strips that will act like tubes when the wax is melted out of the mold. You put the piece in a metal container of the right size and pour plaster around it. After the plaster sets, you heat it so that the wax will run out. After this, you melt metal, gold or silver and pour it in the mold or there is a centrifugal caster that forces the molten metal into the mold and gives a better casting. With the mold hot from melting the wax out and the hot metal, you put it in water and the plaster blow off of the piece.
How can I make a metal mold for casting objects?
To make a metal mold for casting objects, you can start by creating a pattern of the object you want to cast using materials like wood or wax. Then, create a mold box around the pattern and pour in a molding material like sand or plaster. Once the mold is set, remove the pattern to leave a cavity in the mold. Finally, melt and pour molten metal into the mold cavity to create your cast object.
What is a hard and brittle iron that is formed into a particular shape by pouring the liquid metal into a mold?
Cast iron is a hard and brittle iron that is formed into a particular shape by pouring the liquid metal into a mold.
What is the mass of metal cast into a mold and ready for recasting?
A mass of metal cast into a mould is called either an ingot mould or a cold mould. the one that is ready for recasting is usually the ingot mould. A cold mould is one that has been cast on design that maintains its mould.
How can I create DIY metal casting molds at home?
To create DIY metal casting molds at home, you can use materials like sand, clay, or plaster to make a mold of the object you want to cast. Once the mold is ready, you can melt metal in a furnace or with a torch and pour it into the mold. Allow the metal to cool and solidify before removing it from the mold.
