It depends on the tool. In a large drill press, torque is more important. In a small edge trimmer router, rpm is more important. In a large plunge router both are of equal importance.
Advertised Horsepower is: Light duty is 205 HP @ 3600 RPMs. Torque is 335 FT LBS @ 2800 RPMs. The Heavy duty 454 has--240 HP @ 3800 RPMs Torque is 370 FT. LBS @ 2800 RPMs.
the torque is that is where all your power is it doesnt matter how fast the drill spins if it has no torque. That's why impact drills are so good cause they have alot of torque but don't spin as fast. But your should get a drill with alot of torque and a high number of amps per hour
Advertised Horsepower is--245 HP @ 3800 RPMs. Torque is-365 FT. LBS. @ 2800 RPMs. The Heavy Duty 454 has--240 HP @ 3800 RPMs. Torque is--370 FT. LBS. @ 2800 RPMs.
Advertised Horsepower and Torque is, 165HP @ 3800 RPMs. Torque is, 260 FT. LBS. @ 2400 RPMs.
Advertised Horsepower and torque is... HP-----245 @ 4000 RPMs Torque.......355 ft. LBS. @ 3000 RPMs
The 60-horsepower VW engine has a torque specification of 115 pounds at 2000 RPMs. The engine will have 130 pounds of torque at 2500 RPMs.
Advertised horsepower is--- light duty is 165 HP @ 3800 RPMs, torque is--260ft LBS @ 2400 RPMs. .....................................is----heavy duty is 165 HP @ 3800 RPMs. Torque is--255ft. LBS @ 2800 RPMs. Both engines have a 4-barrel carb. This is a 1978 350 CID small block chevy.
Advertised HorsePower is :Factory 4-barrel , 225 HP @ 4600 RPMS. Torque is: 355 FT. LBS @ 3000 RPMS.
Advertised Torque is 290 FT. LBS @ 2400 RPMs. Advertised Horsepower is 175 HP @ 4000 RPMs.
The torque rating for your stock 1968 Camaro 327 cubic inch engine is 235 pounds at 3000 RPMs. The torque rating at 3500 RPMs is 255 pounds.
Advertised HORSEPOWER is--245 HP @ 3800 RPMs. Advertiseed torque is--- 365FT. LBS @ 2800 RPMs.
a acura integras stock d16 makes 300hp at 5500 rpm and 850lbs of torque at 13,300 rpms : ))