answersLogoWhite

0

What else can I help you with?

Related Questions

What is the density of 16mm plywood per meter square?

what the density of 16mm plywood per square meter


What is weight of 1.5 inch plywood?

The weight of 1.5-inch plywood can vary depending on the specific type and density of the wood used. On average, 1.5-inch plywood can weigh approximately 3.2-4.8 pounds per square foot.


Average cost to install tiles?

$3 square foot.


Weight per square meter of 25mm plywood?

It will depend on the thickness of the plywood!


What is the weight capacity of 1/2 inch plywood?

The weight capacity of 1/2 inch plywood can vary depending on the quality and type of plywood. On average, 1/2 inch plywood can typically support around 40-50 pounds per square foot. It is important to check the specific specifications of the plywood you are using for accurate weight capacity information.


What is the average cost per square meter for birch plywood?

It varies from country to country, and also depends on the thickness of the ply sheet.


How many square meters in a 4 x 8 plywood?

Well, darling, a 4 x 8 plywood sheet has a total area of 32 square feet. To convert that to square meters, you simply divide by 10.764, giving you approximately 2.97 square meters. So, in short, there are about 2.97 square meters in a 4 x 8 plywood sheet.


What is the average cost per square foot to install steel siding?

55767


How many square feet in 3 by 5 plywood?

To find the square footage of a 3 by 5 plywood sheet, multiply the length by the width. In this case, 3 feet multiplied by 5 feet equals 15 square feet. Therefore, a 3 by 5 plywood sheet has 15 square feet.


How much roofing shingles to cover 200 plywood?

That is 6400 square feet. You need 1 square for every 100 square feet. So, 64 squares IF you used 100% of the plywood.


Akio cut a piece of plywood into a square. The perimeter of the plywood was 78.4 inches. What was the length of each side?

s


Do two 4x8 sheets of plywood make one square on a roof?

No. there are 32 sq. ft. in each piece of plywood. A square is 100 square feet. That's 3 and 1/3 roughly.