answersLogoWhite

0

Set up your saw horses. Lay a couple or three of 2x2's or 2x4's on the horses. Lay the plywood or sheet goods face down (good side down), mark where you want your cuts, set your blade depth on your circular saw slightly deeper than the sheet is thick, make sure the sheet dropping won't pinch off your blade at the end of the cut, and start sawing.

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

How many 9inchx15inch pieces can you get from 4footx8foot sheet of wood?

To determine how many 9-inch by 15-inch pieces can be cut from a 4-foot by 8-foot sheet of wood, first convert the dimensions to inches. A 4-foot by 8-foot sheet is 48 inches by 96 inches. The area of the sheet is 48 x 96 = 4,608 square inches, and the area of each piece is 9 x 15 = 135 square inches. Dividing the total area of the sheet by the area of each piece gives 4,608 ÷ 135 ≈ 34.2, so you can cut a maximum of 34 pieces.


The cut size needs to be 8 inches by 20 inches. How many pieces of wood can be cut out of a 4 foot by 8 foot sheet of plywood keeping the wood grain running the length of the cut she Wood?

Number of pieces crosswise = 4 ft / 8 inches = 48 inches / 8 inches = 6 Number of pieces lengthwise = 8 ft / 20 inches = 96 inches / 20 inches = 3 So, total number of pieces = 6*3 = 18.


How many 2x2 pieces cut from 8x10 sheet?

exactly 20 of them


A strip of wood 66 inches long is to be cut into five and a half inch pieces. how many pieces can be cut?

12


A strip of wood 78 inches long is to be cut into pieces 3 34 inches long How many pieces can be cut?

20.8


A strip of wood 66 inches long is to be cut into 5 1 2 inch pieces How many pieces can be cut?

12


What is the main use of the band saw?

To cut small and medium pieces of wood accurately.


How many does a 12x 18 sheet pan serve for a wedding?

Depends on how big you cut the pieces. If you cut 2x2 inch pieces, a 12x18 cake will yield 54 servings.


What are the differences between a rip cut and a cross cut when it comes to woodworking techniques?

In woodworking, a rip cut is made along the length of the wood grain, while a cross cut is made across the width of the wood grain. Rip cuts are used to cut wood into narrower pieces, while cross cuts are used to cut wood into shorter pieces. Each type of cut requires different tools and techniques to achieve the desired result.


What is a sentence for stored?

He cut the wood into convenient pieces and then stored it all in the garage.


What is a rabbet cut and how is it used in woodworking?

A rabbet cut is a groove or notch cut into the edge of a piece of wood. It is used in woodworking to create joints, such as for joining two pieces of wood together or for fitting a panel into a frame. The rabbet cut provides a flat surface for the pieces to join securely.


How long does it take to cut a cord of wood?

The time it takes to cut a cord of wood can vary depending on the size of the wood pieces and the tools used, but on average it can take a few hours to a full day for one person to cut a cord of wood.