It will vary depending on where you are but generally if the garage is not attached to the home, you do not have to sheet rock it.
Specific building regulations for installing drywall in a garage according to the local building code may include requirements for fire resistance, thickness of the drywall, and proper installation techniques to ensure safety and compliance with building standards. It is important to consult the local building code or a professional contractor for detailed information on specific regulations in your area.
The specific building code requirement for installing sheetrock in a garage is typically to use fire-resistant Type X sheetrock on the walls that are attached to the house or living space. This is to help prevent the spread of fire between the garage and living areas.
Typically, a 2 car garage minimum width is 24'. This said, there is no reference to minimum widths for garages in the IRC building code that I can find.
The building code for an attached garage in New Jersey typically includes requirements for fire-rated walls, proper ventilation, and adequate structural support. It is recommended to consult with local building authorities or a licensed contractor to ensure compliance with specific regulations in your area.
There are many ways in which one can purchase a garage building. Most garage building are built within a house or complex and are purchased from house builders. However, unattached garages can be bought from garage salesman.
Garage
In the U.S. it would be a garage.
You do not need a building permit if changing the interior of the garage. If you are using heavy machine equipment and moving large lumber on the outside of the garage to make changes then a building permit is required.
Depending on where the garage is to be constructed, building permits may be required. There may be zoning restrictions about the use of the garage, the footprint of the garage, the materials, design, etc. The planning phase must include all of these considerations.
To change the code for your garage door, locate the control panel on the garage door opener unit. Enter the current code and press the "Learn" button. Then, enter a new code and press the "Learn" button again to save the new code.
To change the garage door code, locate the control panel on the garage door opener unit. Enter the current code and press the "Reset" or "Learn" button. Then, enter a new code and press "Enter" or "Set" to save the new code.
A parking "building" is similar to a parking garage, in which a number of floors are connected by ramps which can be driven on in an automobile to find parking. the difference between a garage and a building is that a building is generally completely closed in on most floors.