answersLogoWhite

0

.0995"

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

What size drill bit do you need for a piece of conduit?

Depends on the diameter of the conduit. Try for 1/4" larger diameter drill bit.


What is the diameter of drill bit 30?

A # 30 drill bit is 0.1285 inch, or fractionally more than a 1/8 bit.


What is the standard size of a 6mm drill bit?

The standard size of a 6mm drill bit is 6 millimeters in diameter.


What is the thinnest drill bit available for purchase?

The thinnest drill bit available for purchase is typically around 0.0135 inches in diameter, also known as a 80 drill bit.


What is a hand drill diameter?

A hand drill is scommonly used for holes under 1/4 in in diameterANS 2 - The diameter is simply the width of the drill bit from side to side.


What is the easiest way to measure an unmarked drill bit diameter?

With a micrometer.


What does the letter f on a drill bit indicate?

Drill bits not only come in fractional number sizes they also come in letter sizes. The F size drill bit is .257 thousandths of an inch in diameter. A 1/4 inch drill bit is .250 thousandths of an inch in diameter, so size F is .007 thousandths of an inch bigger than a 1/4 inch drill bit.


What is the diameter of an 8mm drill bit in inches.?

For all practical purposes an 8mm drill is equal to 5/16 inch.


What is the recommended 5 drill bit size for drilling holes in metal?

The recommended 5 drill bit size for drilling holes in metal is 0.2055 inches in diameter.


How to know what size drill bit to use for a specific project?

To determine the correct drill bit size for a project, you should refer to the instructions or specifications provided for the project. Additionally, you can use a drill bit sizing chart or measure the diameter of the screws or fasteners you will be using to select the appropriate drill bit size.


What is measurement of a drill bit?

The measurement of a drill bit is taken across it's diameter. They go from very tiny, right up to inch sizes and are measured in metric or SAE,


What size drill bit should be used for creating a pilot hole?

For creating a pilot hole, use a drill bit that is slightly smaller in diameter than the screw you plan to use.