answersLogoWhite

0

type I is 15# felt and type II is 30# felt

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

How much area can roofing felt measuring 1 meter wide and 8 meters long?

It can cover 8 square metres or 86 square feet or 9.567 square yards.


What does felt mean?

Felt has 2 different meanings.Meaning 1= To touch or feel in the past.Meaning 2= A type of soft cloth.


What is the recommended length for roofing nails?

The recommended length for roofing nails is typically around 1 to 1.5 inches.


How should a porch be pitched?

For metal roofing you can go all the way to 1/12. For composition roofing 3 1/2 to 4 is the recommended minimum.


How do you tell the difference in the type 1 1840 half dime and the type 2?

How to tell the difference, mine is a type two, I will never sell but would like to know the difference.


How much area does a roll of rolled roofing cover not shingles?

Roofing paper, or felt, normally comes in about 150ft rolls and are 3ft wide. Figure about 450 square feet of felt. Remember when estimating required amounts that you need to overlap the felt about 6 inches or so. With an overlap of 6 inches, 1 roll has a coverage of about 375 square feet.


How much does 1 cubic yard of roofing material weigh?

The weight of 1 cubic yard of roofing material can vary depending on the type of material. On average, asphalt shingles weigh around 2,100-2,500 pounds per cubic yard, while metal roofing materials might weigh between 1,000-1,500 pounds per cubic yard. It's best to check with your specific roofing material provider for the most accurate weight information.


In roofing what is the square foot measurement of a square?

1 roofing "square" = 100 square feet. 100 square feet = one square


What information can I find about a-1 roofing online?

There are two major ways to find information about a-1 roofing. First would be to contact their phone (depending on state). Next would to be to visit their website.


What is the recommended thickness for 1/2 roofing plywood when constructing a new roof?

The recommended thickness for 1/2 roofing plywood when constructing a new roof is typically 5/8 inch.


Is there a difference between USB type b female connectors for USB 1 USB 1.1 and USB 2?

No, there is no difference in b type female connectors for usb 1 or 1.1 or 2


What is a square of roofing shingles?

1 square of roofing shingles is 3 bundles of shingles equaling 63 shingles per square.