The purpose of the fascia board is to provide support for the lower edge of the roof and to protect the underlying structure from water damage. It also serves as a finishing element, enhancing the appearance of the exterior of the building.
The facia board extends around the building just below the roof line.
to gain access to the heater control board pull the control knobs off the heater facia undo screws and remove facia the contact board and contact sliders can then be removed and replaced as nessary
I would check the facia board for nail heads. The rafters/trusses are 16" or 24" o.c. If you can find protruding nail heads in the facia and measure the distance between two of them, you can determine where the rest are.
You are correct, It is called a FASCIA board. It is typically made out of 1x material so you may not find it if you are looking up FASCIA board on HD website.
in the rear facia, under the trunk lid there is 9 bolts holding the facia on. You must remove the nuts and pull the facia out and right above the license is the two bulbs 194. replace the bulbs and put the facia back on and you are on your way.
What is the purpose of the Merit Systems Protection Board
The purpose of the National War Labor Board was to mediate disputes between workers and management.
The purpose of board display varies. Most people use them to advertise their businesses and/or services. Others use board displays just to get messages out.
Nothing.
The purpose of an institutional review board is to hold the agency or organization accountable for its actions and policies. The review board also looks into the complaints of consumers and investigates their causes.
The purpose of a ledger board flashing in deck construction is to prevent water from seeping behind the ledger board and causing damage to the structure of the deck.
The purpose of a nursing board is actually to protect the public. They ensure that people practicing as nurses are properly educated and licensed to practice.