0
What else can I help you with?
What size beam do you need to span 30 ft and support the attic storage above it?
Roof Line 30 Foot Span
How can I make a 24-foot beam?
To make a 24-foot beam, you will need to use a solid piece of lumber or metal that is 24 feet long. You can purchase a pre-cut beam or cut a longer piece to the desired length using a saw or other cutting tool. Be sure to measure and cut accurately to ensure the beam is the correct size for your project.
Does a hip roof ridge beam need a post support?
Yes, a hip roof ridge beam typically requires post support to ensure proper load distribution and structural stability. The posts help transfer the load from the ridge beam down to the foundation, preventing sagging or failure. The specific design and requirements may vary based on the roof's size, materials, and local building codes, so it's essential to consult with a structural engineer or architect for proper guidance.
What size of beam do you need to span 14 ft?
That really depends upon the load you need to carry and the material that the beam is made of.
What size beam do you need to span 12 ft?
That always depends on what the beam will be carrying. You will need to consult a building contractor to size any beam correctly. IT ALSO DEPEND ON ITS MATERIAL &ALSO HOW MANY STOREY CONSTRUCTION REQUIRED ON THIS
What size micro lam beam is needed for a 22 FOOT span supporting a ceiling?
big one
How do you size beam by span?
first you need to calculate the load on the entire floor. Different uses mean different loads, you look that up in the building code. Then you calculate how much of the floor is held up by the beam. Then you look up what size of beam to use for the number of pounds per lineal foot. For 1 or 2 family homes you can have a lumber yard do this for you. For commercial construction it has to be done by an architect or an engineer.
What size furnace do you need for your house?
1200 foot propane furnace what size do i need
What size steel I beam do I need to span 32 feet with a load of 2500LB at center?
What size steel I beam do I need to span a 32 feet garage with a floored storage above and no posts
What size steel I beam do you need to carry a 5000 pound point load with a span of 20 feet?
To determine the appropriate size of a steel I-beam for a 5,000-pound point load over a 20-foot span, you'll need to consider factors such as the beam's material properties and safety factors. Typically, a W8x10 or W10x12 I-beam might be suitable for this load, but it's crucial to perform detailed calculations or consult a structural engineer to ensure compliance with local building codes and safety requirements. Additionally, factors such as beam support conditions and deflection limits should be considered in the final design.
What size bulb do I need for the front headlight of a 2002 Oldsmobile intrigue?
Low beam is a 9006 bulb, high beam is a 9005.
What does a 24 foot iron support beam weigh?
The weight of a 24-foot iron support beam can vary depending on the specific dimensions and type of iron used. As a rough estimate, a standard iron support beam of this size could weigh around 300-400 pounds. It is best to consult a manufacturer or supplier for more accurate weight information.
