answersLogoWhite

0

High carbon steel

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

What steel is used to make a screwdriver blade?

A screwdriver head is normally made of toughened/hardened steel or chromium plated steel. Depending on the quality of the screwdriver.


Will a magnetized screwdriver attrat steel screws?

Yes, a magnetized screwdriver will attract steel screws. The magnetization of the screwdriver helps to hold the screws in place and can make it easier to install them.


What materials are used to make a Phillips screwdriver?

A phillips screwdriver is generally made of a steel shaft with a plastic handle


How you can make doctor blade machine for strip steel?

To make a doctor blade machine for strip steel, one would typically need to design and fabricate a blade holder for the doctor blade, a mechanism to adjust the angle and pressure of the blade against the steel strip, and a system to move the blade across the surface of the strip. The machine should also have provisions for adjusting the blade wear and replacing it as needed for efficient operation. Additionally, it is important to consider safety features and proper alignment to ensure consistent performance.


What was used to make the screwdriver?

The first screwdrivers had a steel shank with wood handle.


What kind of products does Xcelite make?

Xcelite makes products like copper hand tools, for example, chrome vanadium steel slotted round blade pocket clip screwdriver, general purpose shearcutter, etc.


Install new chain on Mcculloch chain saw?

Loosen the nuts holding the blade - remove them if necessary. 2) Loosen the blade tightener - generally adjacent to the blade - needs a flat screwdriver. 3) Hook the new chain on the sprocket driver and slip the blade back towards the sprocket and install the chain in the blade groove. 4 )Tighten or replace the nuts loosely. Make sure the blade tightener is in the hole on the blade. 5) Replace the chain tension with the screwdriver. 6) Tighten the blade nuts and recheck chain tension. It should move by hand.


How do you make a kung lao hat?

I;m guessing that you find a hat that looks exactly like Kung Lao's but with out the blade. the you take the hat to a metal crafter or weilder and have them make a steel blade around the hat for you.


Is T10 folded steel blade stronger than non folded T10 steel?

The way I understand it is the process of folding the steel or pattern welding causes a laminated type steal blade that is more flexible than a solid blade of the same steel. When it is folded it is not molten together but bonded. If it was molten together it would not have the characteristics of a laminated blade but a solid piece as if smelted. Think of a laminated piece of wood against a solid piece and you can understand the difference in flexibility and overall strength. Like that of a laminated bow. The laminated blade would flex more and be less likely to break, strength is typical of the hardness of the steel as well. So in a way it would be stronger because of flexibility but you have to take into consideration the hardness. I would research into differential hardening techniques used by sword craftsman to learn more. Hope this helps. Jerrud


Which two metals are most commonly used to make a knifes blade?

The two most common metals used to make knives are steel and iron.


What Alloy was once used to make sword blades?

The alloy for sword blades was Damascus steel.


Why would steel be used to make a bridge?

because steel is strong:)