I took my left over drywall and cut it into 12-15.5 inch sheets and glued it inside the wall (interior walls) between the studs I wanted to be more sound proof. I did it in the bathroom and my bedroom. Obviously you have to do it after one side is done and before you put the final sheets on the other side. You can do it to outside walls but you will limit insulation space and would have to glue it to the plywood or particle board.
Yes, you can use it....but what are you trying to do? The drywall primer is specifically designed to seal the drywall and make the surface uniform. You will not get any benefit from using it on top of a finish coat except for using it as a base coat for changing colors.
White drywall is just normal everyday drywall.
A drywall dimpler is a drill bit used to countersink a drywall screw to the proper depth without breaking the drywall paper.
Drywall has absolutely NO granite in it.
Drywall is VERY porous .
No, you cannot get cut by drywall
The best types of nails to use for drywall installation are drywall nails or drywall screws. Drywall nails are specifically designed for this purpose and have a smooth shank to prevent damage to the drywall. Drywall screws are also commonly used and provide a strong hold. Both options are suitable for securing drywall to studs or joists.
Drywall screws should be placed about 12 inches apart when installing drywall.
The best type of glue for drywall installation is drywall adhesive, also known as drywall compound or joint compound.
You should use a utility knife or a drywall saw to cut drywall.
No, asbestos was not used in drywall. Drywall is typically made of gypsum and paper, not asbestos.
To replace drywall in your home, you will need to remove the damaged drywall, measure and cut new drywall to fit the space, secure the new drywall in place with screws, tape and mud the seams, and then sand and paint the new drywall to match the existing walls.