This tool is called a planer. There are both small hand-planers and very large machine planers.
Of course depending on the need, you can simply use sandpaper.
A flat piece of wood is called a board.
A thick piece of wood is called a plank. It is a long, flat piece of wood that is often used in construction or woodworking projects.
You can make one yourself out of a piece of flat wood or metal and some rubberbands.
The flat chisel is a popular woodworking tool, for cutting and shaping wood
The first straight edge was made by shaping a piece of material, such as metal or wood, into a long, flat, and perfectly straight tool. This tool was then used for measuring and drawing straight lines accurately.
To make wood letters, you can use a scroll saw or a wood carving tool to cut out the desired letter shapes from a piece of wood. Sand the edges to smooth them out, and then paint or stain the letters as desired for a finished look.
You make a wheel by adding Wood and Tool
To make fire with sticks, you can use a method called friction fire starting. This involves rubbing a stick against a flat piece of wood to create enough heat to ignite a fire. The stick used for rubbing is typically a hardwood stick, while the flat piece of wood is usually a softer wood. By rapidly rubbing the stick against the flat wood, friction generates heat, eventually creating an ember that can be used to start a fire.
A plank or a board.
To effectively make circles in wood using a tool, such as a compass or a circle cutting jig, follow these steps: Secure the wood firmly in place. Adjust the tool to the desired circle size. Place the tool on the wood and rotate it carefully to cut the circle. Use a steady hand and apply consistent pressure for a clean cut. Practice on scrap wood before working on your final piece for precision.
To groove a piece of wood, you can use a router with a straight bit or a dado blade on a table saw. Set the depth of the cut, position your wood piece, and slowly pass it along the tool to create the groove. Make sure to wear appropriate safety gear and practice on scrap wood first.
The tool used to make holes in wood is called a drill.