answersLogoWhite

0

You always weld the side with the preperation first, then if you get incomplete penetration you can grind the back out

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

What is the angle of the bevel of a butt weld?

The angle of the bevel for a butt weld typically ranges from 30 to 37.5 degrees, depending on the thickness of the materials being welded and the specific welding code or standard being followed. A common bevel angle is 45 degrees, as it allows for good penetration and fusion of the weld metal. The bevel design helps ensure a strong joint and is influenced by factors such as the welding process and the type of materials involved.


What is bevel weld?

A bevel weld is a type of joint used in welding where the edges of the base materials are shaped at an angle, typically between 30 to 45 degrees, to facilitate better penetration and bonding during the welding process. This configuration is particularly useful for thick materials, as it allows for a deeper weld pool and ensures a stronger joint. Bevel welding is commonly employed in applications such as structural steel fabrication and pipe welding. It enhances the overall strength and integrity of the welded joint by providing a larger surface area for the weld metal.


What is the most common degree of bevel on a pipe to be butt welded?

37&1half


What does TCU4a weld symbol mean?

A TCU4a weld is a Corner Jount (TC), Unlimited Thickness Full Joint Penetration (U), Single Bevel Groove (4), and (a) is the welding process.


What does double bevel mean for miter saw?

It means the blade can be tipped in two directions. Either left or right. A single bevel saw can only lean the blade in one direction. You can do the same cuts with a single bevel saw, but a dual bevel can save time and can make some cuts easier.


Should a needle be inserted with bevel up or down?

Always bevel up.


Should a needle be inserted bevel up or down?

Always bevel up.


What is a single bevel miter saw?

It is a mitre saw that only angles one way.


Which way should the bevel of the needle be held when performing venipuncture?

When inserting a needle, the needle is inserted bevel up.However, at least 1 study suggests (in the same article) that bevel down may help on difficult sticks, on pediatric or dehydrated adults.


Three types of bevel gear employed in rear axles?

hypoid bevel, spiral bevel and straight bevel


What were James Bevel brothers and sisters names?

Eva Artimese BEVEL (1926-2005)Mary Alice BEVEL (1928-1987)Otis Calvin BEVEL (1930-)Victor Lloyd BEVEL (1931-)Clarence Kermit BEVEL (1933-1961)Floydzell BEVEL (1935-2009)Charles William BEVEL (1938-)Helen Vera BEVEL (1940-)Evelyn BEVEL (1943-)Johnny Erskine BEVEL (1944-)Half-SiblingsMattie BEVEL (1907-1986)Dennis BEVEL (1908-1995)Earl BEVEL (1912-1979)Rosa Mae THORNTON (1919-)Dorothy Dealma THORNTON (1921-2008)David BEVEL (1923-1999)


Which way should the bevel be facing when entering in the arm?

When entering the arm, the bevel of the needle should be facing up or towards the skin. This orientation helps facilitate smoother insertion and reduces the risk of tissue damage. Proper bevel alignment also aids in minimizing discomfort for the patient during the procedure.