The highest point, the peak of each gable or hip.
The apex of roof is basically the highest point of the roof where ridge cap and ridge roll of a roof is located.
To seal the ridge from weather. If a ridge vent is used it is just that, a vent for the roof.
The highest part of the roof is the ridge.
The highest point of each roof area.
peak or ridge or ridge cap
The top of the house had a ridge on it.Our house has a ridge on the top of the roof.
To install ridge cap on a roof, first, ensure the roof is clean and dry. Place the ridge cap over the peak of the roof, making sure it overhangs evenly on both sides. Secure the ridge cap in place using roofing nails or screws. Seal the edges with roofing caulk to prevent water leakage. Repeat the process for the entire length of the roof ridge.
In roof construction, a ridge board is a horizontal piece that connects the upper ends of the rafters, while a ridge beam is a larger, structural beam that supports the weight of the roof. The ridge board is mainly for alignment and connection, while the ridge beam provides structural support.
Ridge
The purpose of a ridge board in a roof structure is to provide support and stability to the rafters at the peak of the roof. It helps to distribute the weight of the roof evenly and prevent sagging or shifting of the roof structure.
One alternative method for roof construction that eliminates the need for a ridge board is using a ridge beam instead.
For a typical gable roof you have a ridge board at the top with rafters running from the ridge to the top plates of the walls