To drill open a mortise lock means creating a substitute "shear line". For those who are not locksmiths, a shear line is created when the proper key is inserted into the lock and the top and bottom pin tumblers line up flush to turn the plug.
Using a 1/4 inch carbide tip drill bit, drill about an 8th of an inch above the keyway. It's advisable to use a center punch so the drill bit doesn't "walk" and damage the whole cylinder.
Start drilling slow at first so the drill bit can get a "bite" and not fly off and cause you injury or damage the door. Then apply pressure to drill through the plug but don't push too hard or the bit might break off in the lock. When you feel a slight jolt, it means you drilled through a pin.
Keep going until you've drilled through all 5 pins. Do not drill too deep or you'll damage the whole lock mechanism. Then stop drilling and use a pick or scratch awl to scape the remaining pins out of the chambers and you can turn the plug with a screwdriver and it will unlock the door.
Yes, a mortise bit can be used in a hand drill for woodworking projects to create mortise joints.
I've had to open a few when people lose their keys. Generally it is a 3 or 5 lever lock and by checking the workings on another-that's it the one you keep in the back of the van- you can sort out where to drill through the door and lock to get access to the levers, which you can then hook up with a screwdriver. Another way is to cut through the stile and just allow the door to open
The best technique for using a mortise bit with a drill to create precise and clean mortises in woodworking projects is to secure the workpiece firmly in place, set the depth of the mortise on the drill, and proceed to drill out the mortise in a series of overlapping holes. This method helps to ensure accuracy and clean edges in the mortise.
To use a mortise bit with a hand drill, it is best to secure the workpiece firmly in place and drill slowly and steadily to ensure accuracy and prevent splintering. Additionally, using a depth stop on the drill can help control the depth of the mortise.
A Mortise Lock is unique in that when it is fitted by a locksmith, a small section - Mortise is cut through the door frame to connect the lock. The lock is different to others in that a homeowner cannot fit it as one requires wood making knowledge and tools and it is labour intensive.
To install a mortise lock conversion kit, first remove the existing lock hardware. Next, install the new mortise lock mechanism into the door. Then, attach the strike plate to the door frame. Finally, test the lock to ensure it functions properly.
A cylindrical lock is installed on the surface of a door, while a mortise lock is installed inside the door. Mortise locks are generally considered more secure and durable than cylindrical locks. If you prioritize security, a mortise lock would be more suitable for your specific security needs.
Using a mortise lock on a patio door provides enhanced security and durability compared to other types of locks. The mortise lock is more resistant to forced entry and offers a higher level of protection for your home. Additionally, the design of the mortise lock allows for smoother operation and longer lifespan, making it a reliable choice for securing your patio door.
To properly mortise a door for a new lock, use a chisel and hammer to create a recess in the door that matches the size and shape of the lock. Make sure the mortise is deep enough for the lock to fit securely. Test the fit of the lock before installing it to ensure it sits flush with the door surface.
The process for replacing a mortise lock involves removing the old lock, measuring the dimensions of the door, selecting a new lock that fits those dimensions, installing the new lock in the door, and testing to ensure it functions properly.
A mortise Lock is most commonly used on doors. It requires a "pocket" or hole to be cut in the door, and a plate to be places in the frame that the door will attach to when closed.
Either drill lock out or try removing rear seat back for access