When it is cut from the tree it starts out 2 x 4". During the drying and planing process its size is reduced.
3/4" x 2 1/2"
The actual size of 1x2 lumber is 3/4 inch by 1 1/2 inches.
3/4 x 3 1/2
3/4 x 1 1/2"
4
The **"actual size"** refers to the true, precise dimensions of a product or material after manufacturing, while the **"nominal size"** is the label or standard size used for identification and may differ slightly from the actual size due to trimming or finishing processes. For example, a 2x4 piece of lumber has a nominal size of 2 inches by 4 inches, but its actual size is typically 1.5 inches by 3.5 inches.
The motor size of most chainsaws are approximately 2 cc. There are, however, different size motors that range from 2 cc to 4 cc.
4*8
1 3/4" x 12. Generally, the length is accurate, but the width rarely is.
EMT is electrical metallic tubing. In the electrical trade there are nominal sizes expressed as a standard size. To answer your question you must state the conduit size in either electrical terms or in standard size terms to get a conversion size.For example standard size 1/2" EMT has an actual diameter size of 3/4" and the 1/2"EMT connector for the 1/2" EMT conduit needs a 7/8" hole.Likewise with 3/4" EMT the actual outside diameter is 15/16" and the 3/4" EMT connector needs a 1-1/8" hole.
There are different sizes when framing lumber. The most common size of framing lumber is 2 by 4.
It would depend on the size of the drawing. If it's drawing height is 2 cm, the actual height would be 2*2ft = 4 ft tall. If the drawing height was 3 cm, the actual height would be 3*2ft = 6 ft tall.