Don't know I was asking you the same question
To disable the coaster brake on your bike, you will need to remove the rear wheel and the coaster brake hub. You can then replace the coaster brake hub with a freewheel hub, which does not have a coaster brake mechanism. This will allow you to ride your bike without the coaster brake engaging when you pedal backward.
The different types of bicycle rear hub types available in the market include freewheel hubs, cassette hubs, and coaster brake hubs. Freewheel hubs have the freewheel mechanism built into the hub, while cassette hubs have the freewheel mechanism built into the cassette. Coaster brake hubs have a brake mechanism built into the hub that is activated by pedaling backward.
To remove a freewheel hub, you will need a freewheel removal tool and a wrench. First, remove the wheel from the bike. Then, insert the removal tool into the freewheel and turn it counterclockwise to loosen and remove the freewheel from the hub. Be careful not to damage the hub or the freewheel threads during this process.
To remove a freewheel hub from a bicycle, you will need a specific tool called a freewheel remover. First, remove the wheel from the bike. Then, insert the freewheel remover into the freewheel and use a wrench to turn it counterclockwise to loosen and remove the freewheel. Be careful not to damage the hub or the freewheel threads during the process.
To remove the freewheel hub from your bicycle, you will need a freewheel removal tool and a wrench. First, remove the wheel from the bike. Then, insert the removal tool into the freewheel and use the wrench to turn it counterclockwise to loosen and remove it from the hub. Be sure to follow the specific instructions for your bike's freewheel type to avoid damaging the hub or the freewheel.
A coaster brake is hub based. Internally geared hubs. Some generators are hub based as well.
A freewheel hub dose not make the pedals go forward when the backwheel is turning, a track hub dose.
If you mean riding backwards under power, they you'd have to have a wheel custom built around a fixed-wheel hub. Not impossible but it'll cost a bit. If you simply want a freewheel hub instead of a coaster brake hub, such a bike should be possible to find. At worst , you can have a wheel built around a regular BMX hub which usually are freewheeling.
To remove a coaster brake from a bicycle, you will need to first remove the rear wheel. Then, locate the coaster brake arm and disconnect it from the hub. Finally, remove any additional components attached to the brake system and reinstall the rear wheel.
A cassette hub has the freewheel mechanism built into the hub itself, allowing for smoother and more efficient pedaling. A freewheel, on the other hand, is a single unit that threads onto the hub and contains both the sprockets and freewheel mechanism. If you are looking for better performance and durability, a cassette hub would be more suitable for your bike.
A rear coaster brake is a type of brake on a bicycle that is located inside the rear hub of the wheel. When you pedal backward, the brake engages and slows down the bike by applying pressure to the hub, causing the wheel to stop turning. This type of brake is commonly found on cruiser bikes and some children's bikes.
Usually the sprocket is an inseparable part of the freewheel, and the size of the freewheel is determined by the hub.